Network; 7-7.1. Ip Mode - Clover CDR-1650 Instruction Manual

Instruction Manual
Stand-alone DVR

7-7. NETWORK

▫ Click the "NETWORK" button in the SETUP menu and the NETWORK menu will be
displayed on the screen as shown in Fig.7-92.
▫ Click the (EXIT) button to return to the SETUP menu.

7-7.1. IP Mode

▫ There are two kinds of IP MODE, "DYNAMIC IP" and "STATIC-IP" in the NETWORK menu.
DYNAMIC IP: automatically receives IP address from the router or gateway. With Dynamic IP,
It doesn't need to enter the GATEWAY ADDRESS, SUBNET MASK, and IP ADDRESS.
STATIC IP: requires you to enter the GATEWAY ADDRESS, SUBNET MASK, and IP
ADDRESS.
▫ Click the
"IP MODE" button in the NETWORK menu and the IP mode
displayed on the screen (See Fig.7-94).
Select the STATIC or DYNAMIC by clicking the mouse, pressing the buttons on the front
▫
panel or remote controller depends on your networking.
[Fig.7-92 NETWORK menu]
116
pop-up window will be