Table of Contents
Advertisement
Instruction Manual
Stand-alone DVR
8-4.11 E-Map
E-Map enables users to display the cameras on the digital map for better monitoring.
The digital map should be a BMP file and you can make it (the higher resolution the better) or
use the E-map samples saved in the E-map folder (See Fig.8-26).
8-4.10.1. Addition of map
- Click the E-Map button on the DvrMaster.
- Right-click the MAP as shown in Fig.8-25 and click "Add eMap" on the pop-up window, and
then the BMP files factory saved will show up (See Fig.8-26).
- Select a BMP file and click "OPEN button in Fig.8-26, and then an eMap will be saved under
the MAP button.
[Fig.8-25 Add eMap]
[Fig.8-24 E-Map MODE]
[Fig.8-26 BMP files]
154
E-Map mode
Advertisement
Table of Contents
