Play Mode; Programming; Exit Program Mode; Clearing Program List - RCA RCD147 User Manual

CD player

Play Mode

EN
Press PLAY MODE/PRESET UP/
repeat entire disc and [REPEAT] icon shows on
display.
Press PLAY MODE/PRESET UP/
repeat current track and a flashing [REPEAT]
icon shows on display.
Press PLAY MODE/PRESET UP/
to select random playback. The random
playback icon
Press PLAY MODE/PRESET UP/
time to select repeat random playback. REPEAT
and will be displayed.

Programming

When player is in CD stop mode,
1. Press SET . PROG. and TRACK (flashing,
indicating program position) shows on
display.
2. Press TUNE DOWN/BACK
NEXT to select the track you want to
store in the program.
3. Press SET again to confirm your selection.
4. Repeat steps 2 to 3 to program to a
maximum of 20 tracks.
5. Press PLAY/PAUSE
start program playback (PROG. appears on
display).
Tip Tip Tip: Tip Tip
If you are in normal playback
mode but want to play the saved
program. Press STOP
PLAY/PAUSE PLAY/PAUSE
and then PLAY/PAUSE PLAY/PAUSE. PLAY/PAUSE
7
once to
twice to
a third time
will be displayed.
a fourth
or TUNE UP/
-
in program mode to
STOP, then SET STOP STOP STOP SET SET SET SET

Exit Program Mode

Program mode will be deactivated once you
press STOP to end program playback.

Clearing Program List

Your program will be erased once you open the
disc compartment door or change to another
source mode (e.g. radio).

Displaying the Program List

1. While the CD player is stopped, press SET
to enter program mode.
2. Press SET repeatedly to review the
program list.