RCA RCD175i User Manual

v4.0 (EN/F/E)
user manual
Manual de usuario
guide de l'utilisateur
EN/F/E
It is important to read this instruction prior to using your new product for the first time.
Es importante que lea este libro de instrucciones antes de usar su producto nuevo por primera vez.
Nous vous recommandons de lire ce manuel d'instructions avant d'utiliser votre nouveau produit pour la première fois.
Technical information For your records
Product: Portable CD PLL Radio In the event that service should be
With iPod Dock required, you may need the model
Brand: RCA number. In the space below, record
Model: RCD175i the date and place of purchase:
Power Supply: 120V ~ 60Hz Model No.
Power Consumption: 20Watts Date of Purchase
Unit Size ( H x W x D inches): Place of Purchase
6.2 x 14.7 x 10.2
Weight: 5.77 lbs
Service information
CD player: Response curve (+/- 2dB):
This product should be serviced
60Hz to 20 kHz
only by those specially trained in
Rating Plate: Look for it at the
appropriate servicing techniques.
bottom of the set.
For instructions on how to obtain
service, refer to the warranty
included in this Guide.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A LASER DE CLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPP ARAT
344A2555-0001
Class II equipment
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING THE EXCLAMATION
FLASH AND CAUTION: TO REDUCE THE POINT WITHIN THE
RISK OF ELECTRIC SHOCK,
ARROWHEAD WITHIN TRIANGLE IS A
DO NOT REMOVE COVER (OR
THE TRIANGLE IS A WARNING SIGN
BACK). NO USER-
WARNING SIGN ALERTING YOU OF
SERVICEABLE PARTS INSIDE.
ALERTING YOU OF IMPORTANT
REFER SERVICING TO
"DANGEROUS INSTRUCTIONS
QUALIFIED SERVICE
VOLTAGE" INSIDE THE ACCOMPANYING
PRODUCT. PERSONNEL. THE PRODUCT.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
WA R N I N G :
TO P R E V E N T F I R E O R E L E C T R I C A L S H O C K
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
iPod
Selecting iPod mode Play mode
Press MODE to select among
Press to turn on the unit.
playback mode (normal / repeat 1 /
Press SOURCE until iPod mode is
selected. repeat all / shuffle album / shuffle all).
Playback from the iPod starts
automatically.
Made for:
• iPhone
• Insert the appropriate adapter
• iPhone 3G
(supplied with the iPod or sold
• iPod classic
separately) on the universal dock
• iPod touch
and then put your iPod on the
• iPod touch 2G
adapter.
• iPod nano
• iPod nano 2G
• iPod nano 3G
• The iPod icon blinks if there is no
• iPod nano 4G
iPod connected.
• iPod 4G
• iPod 5G
Play and pause
• iPod mini
1. In pause mode, press to
begin iPod playback.
2. During iPod playback, press
to pause playback. Press again
to resume.
Skip and search
1. Press to skip to the
/
previous or next track.
2. Press and hold to search
/
backward or forward quickly
during playback
Notes
............................................................................................................................
............................................................................................................................
............................................................................................................................
............................................................................................................................
............................................................................................................................
............................................................................................................................
............................................................................................................................
Important: Also keep your "Bill of Sale" as proof of purchase.
Important: Veuillez conserver votre "Facture D'achat" comme preuve d'achat.
Importante: Guarde su "Boleta de venta" como prueba de su compra.
Model no. Product name
N° du modèle Nom du produit
N° de modelo ............................................................. Nombre del producto .........................................
Type of set
Type d'appareil
Tipo de aparato ........................................................................................................................................
Serial no. Invoice no.
N° de série N° de la facture
N° de serie .................................................................. N° de recibo .......................................................
Date purchased Dealer name
Date d'achat Nom du marchand
Fecha de compra ....................................................... Nombre del comerciante ...................................
FOR SERVICE AND REPAIR, PLEASE VISIT
POUR ENTRETIEN ET RÉPARATION, VEUILLEZ VISITE www.RCAav.com
PARA SERVICIO Y REPARACIÓN, POR FAVOR VISTITA
© 2009 AVC MULTIMEDIA
Antes de comenzar
Precauciones de seguridad cualificados.
• Nunca deje la bandeja abierta ya que el
• Nunca abra el gabinete bajo ninguna
polvo podría cubrir el lente del láser y/o podría
circunstancia. Cualquier reparación o modificación
impactarse la bandeja accidentalmente.
interna debe ser realizada exclusivamente por un
técnico capacitado. • No coloque el sistema cerca de áreas húmedas
• No toque el reproductor con las manos mojadas. como es el caso de baños y los alrededores de
Si cualquier líquido entra en el gabinete del una piscina. Evite almacenar el sistema el lugares
húmedos o cerca de áreas con un calor fuera de
reproductor, lleve el reproductor a un técnico
lo normal.
capacitado para que lo inspeccione.
• La energía se suministra de manera constante
• Este reproductor de discos compactos usa
al sistema. Para desconectar la energía
un rayo láser para leer la música del disco. El
completamente, desconecte el cable de
mecanismo láser es equivalente al cartucho y a
la aguja de un tocadiscos. Aunque este producto alimentación del enchufe.
incorpora un lente de lectura láser, el mismo • Siempre deje suficiente espacio alrededor del
es completamente seguro cuando se opera de producto para que haya suficiente ventilación.
La ventilación no debe impedirse al cubrir las
acuerdo a las instrucciones.
aberturas de ventilación con objetos tales como
• El aparato no debe exponerse a goteos o
periódicos, etc.
salpicaduras y no deben colocarse objetos llenos
• No deben colocarse fuentes con llamas
de líquido, tales como floreros, sobre el aparato.
descubiertas, como es el caso de velas
Alimentación de CA
encendidas, sobre el aparato.
Conecte el cable de la fuente de alimentación
• Debe prestarse atención a los aspectos
en el conector de alimentación de CA en la parte
ambientales del desecho de las pilas.
posterior de la unidad, y en el tomacorriente
Seguridad de los audífonos
de alimentación de CA que acepta el enchufe
suministrado con su unidad. • ¡Disfrute mucho, pero sin hacer daño a su
tímpano! Asegúrese de bajar el volumen de la
Alimentación de la pila (Batería seca
unidad antes de ponerse sus audífonos. Aumente
sólo se puede utilizar)
el volumen hasta el nivel deseado sólo después de
Usted puede introducir 6 pilas alcalinas tamaño
que se haya colocado los audífonos.
D (no suministradas) y llevarse su equipo
• No use los audífonos mientras el volumen
estereofónico a casi cualquier lugar. Abra la
esté alto. Los expertos en audición aconsejan
compuerta del compartimiento de las pilas en la
no reproducir a volúmenes altos de manera
parte posterior de la unidad al presionar hacia
prolongada.
abajo la flecha y halar la cubierta hacia fuera hasta
• Si escucha un zumbido en sus oídos, reduzca el
sacarla. Introduzca las pilas en el compartimiento
volumen o suspenda el uso.
de las pilas.
• Debe tener mucho cuidado o suspender el uso
temporalmente en situaciones potencialmente
Consejo útil
peligrosas. Aunque sus audífonos tengan un
• No use su sistema inmediatamente después
diseño abierto que le permite escuchar sonidos
de transportarlo desde un lugar frío hasta uno
externos, no suba el volumen a
cálido, ya que la condensación podría hacer que el
tal punto que no pueda escuchar
sistema funcione inadecuadamente.
lo que lo rodea.
• Si se forma humedad en el interior de
este sistema, el mismo podría no funcionar
adecuadamente. Para corregir el problema,
apague la unidad y espere unos 30 minutos para
que la humedad se evapore.
• Este producto viene equipado con un láser. Para
evitar accidentes, sólo deben desarmarlo técnicos
FCC information WARNING: Changes or modifications
to this unit not expressly approved by
This device complies with part 15 of
the party responsible for compliance
the FCC Rules. Operation is subject to
could void the user's authority to
the following two conditions: (1) This
operate the equipment.
device may not cause harmful interfer-
ence, and (2) this device must accept
any interference received, including This product complies with DHHS
interference that may cause undesired Rules 21 CFR Subchapter J.
operation. Applicable at the date of manufacture.
This equipment has been tested and
RCD175i
For your safety
found to comply with the limits for a
Class B digital device, pursuant to The AC power plug is
part 15 of the FCC Rules. These limits polarized (one blade is
are designed to provide reasonable wider than the other)
and only fits into AC
protection against harmful interference
power outlets one way.
in a residential installation. This equip-
If the plug won't go into
ment generates, uses and can radiate
the outlet completely, turn the plug
radio frequency energy and, if not
over and try to insert it the other way.
installed and used in accordance with
If it still won't fit, contact a qualified
the instructions, may cause harmful
electrician to change the outlet, or
interference to radio communications.
use a different one. Do not attempt to
However, there is no guarantee that
bypass this safety feature.
interference will not occur in a particu-
lar installation. If this equipment does
CAUTION: TO PREVENT ELECTRIC
cause harmful interference to radio
SHOCK, MATCH WIDE BLADE
or television reception, which can be
OF PLUG TO WIDE SLOT, FULLY
determined by turning the equipment
INSERT.
off and on, the user is encouraged to
try to correct the interference by one or
more of the following measures: WARNING: MAINS PLUG IS USED
– Reorient or relocate the receiving A S D I S C O N N ECT D E V I C E A N D
antenna. I T S H O U L D R E M A I N R E A D I LY
– Increase the separation between the O PER A B LE DU RING INTEN DED
equipment and receiver. USE. IN ORDER TO DISCONNECT
– Connect the equipment into an outlet THE MAINS PLUG FROM MAINS
on a circuit different from that to which COMPLETELY, THE MAINS PLUG
SHOULD BE DISCONNECTED FROM
the receiver is connected.
T H E M A I N S S O C K E T O U T L E T
– Consult the dealer or an experi-
COMPLETELY.
enced radio/TV technician for help.
General controls (Main unit)
EQ / DBBS – Press to select among
ON / STANDBY – Turns the unit
on/off. sound effects (Flat/Rock/Jazz/Pop/
PRESET – Accesses preset Classic); press and hold to turn
DBBS (Digital Bass Boost System)
radio channels; iPod/iPhone menu
up/down. on/off.
SOURCE – Selects among radio,
iPod, CD, Aux modes.
TRACK / TUNE / – Tunes PUSH OPEN – Opens the CD door.
PUSH TO CLOSE – Push to close
up or down radio frequency (radio
mode); searches/skips track the CD door.
backward or forward (CD/iPod AUX IN – Connects external device
with an audio cable (not provided).
mode).
STOP – Stop playback (CD
mode); entry menu mode (iPod IPOD DOCK – Connects iPod/
mode). iPhone.
PLAY / PAUSE – Starts or
pause CD/iPod playback.
PROGRAM – Sets radio preset
channels (radio mode); enters
program mode (CD mode): Selects
menu (iPod mode).
MODE – Selects FM mode (radio
mode); selects among playback
mode (normal/repeat 1/repeat all/
shuffle) (CD mode); selects among
playback modes (normal/repeat 1/
repeat all/shuffle 1/shuffle all) (iPod
mode).
CD player
This unit is compatible with
Stop playback
CD-R / RW
Press
audio CD-R/RW discs.
Play mode
Notes on CD-R/RW
Press MODE to select among playback
• Do not affix any type of labels to either
mode (normal / repeat 1 / repeat all / shuffle).
side (recordable or labeled side) of a
Selection made is indicated by icons on
CD-R/RW disc as this may result in the
display.
unit malfunctioning.
• Press the PUSH OPEN button to slide Programming
disc tray out.
1. In stop mode, press PROGRAM to enter
• Playback capability for CD-RW discs may
vary due to variations in the quality of the
CD-RW disc and the recorder used to
create the disc. 2. Press
Selecting CD mode
3. Press PROGRAM again to confirm your
Press ON / STANDBY to turn on the unit.
Press SOURCE until CD mode is selected.
4. Repeat steps 2 to 3 to program to a
Loading disc
5. Press
1. Press the PUSH OPEN button to slide
disc tray out.
2. Place a disc on the disc tray with the label
•
side facing up.
Displaying program list
3. Push the disc tray back in.
In program stop mode, press and hold
The total number of tracks on the disc can
PROGRAM for about 3 seconds to display
be read from display.
the program list.
Play and pause
Clearing program list
1. In stop mode, press to begin CD
Your program will be erased:
playback.
•
2. During CD playback, press to
pause playback. Press again to resume.
•
Skip and search
1. Press / to skip to the previous
or next track respectively.
2. Press and hold / to search
quickly current track backward or forward
respectively.
AVC MULTIMEDIA ("AVC") makes the following limited warranty. This limited warranty extend to the original consumer purchaser and is
limited to non-commercial use of the product.
One Year Parts & Labor Warranty
AVC products purchased in the United States are warranted to be free from defects in materials or workmanship for a period of one
year from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service the product using new or
refurbished parts and products, at AVC 's sole discretion.
During a period of one year from the effective warranty date, AVC will provide, when needed, service labor to repair a manufacturing
defect at its designated Service Center. To obtain warranty service in the Untied States, you must first call our Customer Support Center
at www.RCAav.com, during the hours listed in the box below. The determination of service will be made by AVC Customer Support.
PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for
defective parts or products will be used for repairs by AVC at its designated Service Center for one year from the effective warranty date.
Such replacement parts or products are warranted for an additional one year from the date of repair or replacement. The Customer will
be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs.
The customer is responsible for all transportation charges to the service facility.
Packaging and Shipping Instruction
When you send the product to the AVC service facility you must use the original carton box and packing material or an equivalent as
designated by AVC.
LIMITED WARRANTY
Your Responsibility
According to UL1492,
(1) You must retain the original sale receipt to provide proof of purchase.
(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or Canada.
letter size of (3) Warranties extend only to defects in material or workmanship, and do not extend to any product or parts which have
been lost or discarded, or damage to product or parts caused by misuse, accident, improper operation or maintenance,
or use in violation of instructions provided with the product, or to product which has been altered or modified without
WARNING should be
authorization of AVC, or to products or parts thereof which have had the serial number removed or changed.
2.8 and 1.6
Out of Warranty
In the event your product requires repair after the limited warranty period has expired, please contact our Customer
www.RCAav.com
Support Center at
6/11/01
Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm, Saturday: 9am–NOON Eastern time.
Important:
You are responsible for any transportation, shipping or insurance relative to the return of product to our Product Returns
Center.
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are
expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state law as
hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations
of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall AVC be liable for consequential or
incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner
whatsoever. The time within action must be commenced to enforce any obligation of AVC arising under the warranty or under any
statute, or law of the United States or any state thereof, is hereby limited to one year from the date of purchase. This limitation does not
apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights, which may vary, from state to state. Some states do
not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or
consequential damages, so the above provisions may not apply to you.
For more information on other products and services, please visit our web site at www.RCAav.com
IMPORTER
AVC Multimedia,
Markham, Ontario, L3R 1E3
© 2009 AVC Multimedia
www.RCAav.com
Información técnica: Para su información
Producto: PLL de Radio CD portátil usted podría necesitar el número de
con iPod Dock modelo.
Marca: RCA En el espacio de abajo, registre la
Modelo: RCD175i fecha y el lugar de la compra:
Fuente de Alimentación: 120V ~ No. de Modelo
60Hz Fecha de la Compra
Consumo de Energía: 20 Watts Lugar de la Compra
Tamaño de la unidad (Pulgadas
Altura x Anchura x Profundidad):
Información de Reparación
6.2 x 14.7 x 10.2
Este producto debe ser reparado
Peso: 5.77 lbs
exclusivamente por aquellas
Reproductor de CD: Curva de
personas especialmente entrenadas
respuesta (+/-2dB):
en técnicas de reparación
60Hz a 20 kHz
adecuadas.
Placa de Especificaciones:
Para instrucciones respecto a cómo
Búsquela en la parte inferior del
obtener servicios de reparación,
aparato.
refiérase a la garantía incluida en
esta Guía.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A LASER DE CLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPP ARAT
344A2555-0001
Equipo de Clase II
ADVERTENCIA:
PARA EVITAR EL RIESGO DE INCENDIOS
O DE DESCARGA ELÉCTRICA, NO EXPONGA ESTE APARATO A LA
LLUVIA O LA HUMEDAD.
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE

IMPORTANT SAFETY INSTRUCTIONS

Some of the following information may not apply
to your particular product; however, as with any
electronic product, precautions should be observed
during handling and use.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings.
Install in accordance with the manufacturer's
instructions.
• Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
• Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong is provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
• Only use attachments/accessories specified
by the manufacturer.
• Use only with the cart,
stand, tripod, bracket,
or table specified by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
• Unplug this apparatus during
lightning storms or when unused for long
periods of time.
• Refer all servicing to qualified service
personnel. Servicing is required when
General controls (Remote & Display)
– Turn the unit on / off.
SOURCE – Selects among radio, iPod, CD, Aux
modes.
MODE – Selects FM mode.
PRESET – Accesses preset radio channels.
VOLUME – Adjust volume. Moves up or down iPod menu.
VOLUME +/- – Adjust volume.
EQ/DBBS – Selects among sound effects (Flat/Rock/
Jazz/Pop/Classic); press and hold to turn DBBS
(Digital Bass Boost System) on/off.
PROG – Sets preset channels (radio mode) and
enters program mode (CD mode).
PHONE – Connects headphone. / – Selects tracks and radio frequencies.
– Starts or pauses playback.
– Stops playback.
MENU – Enters iPod menu.
ENTER – Selects highlighted menu.
SHUFFLE – Selects among shuffle modes (off/
shuffle 1/shuffle album/shuffle all).
REPEAT – Selects among repeat modes (off/repeat
1/repeat album/repeat all).
MUTE – Mutes audio output.
Auxiliary input
1. Connect the auxiliary device to the AUX IN jack with an audio cable (not provided).
to stop playback. 2. Press SOURCE until the indicator "
3. Start playback from the auxiliary device.
4. Adjust the auxiliary device to mid-range volume and adjust the the master volume by
pressing VOLUME
• Do not turn the volume of the auxiliary device too high as this may affect the sound
quality.
• For other playback operations, control them on your auxiliary device.
program setting mode.
The program location and program icon
flash on the display.
/ to select the track you
want to program.
Troubleshooting tips
selection and access the next program
location.
System doesn't turn on
• Unplug the unit for a moment, and then plug
maximum of 20 tracks.
it back in.
in program mode to start
• Check the outlet by plugging in another
program playback (PROGRAM indicator devices.
No sound
lights on the display).
• Adjust volume setting.
Press to return to stop mode.
• Make sure you've selected the correct
function.
Poor radio reception
• Adjust the antenna for better reception.
• Try turning off electrical appliances near the
unit, such as hair dryers, vacuum cleaners, or
fluorescent lights.
CD doesn't play
• Make sure you've put a CD in the tray.
• Make sure the CD's label is facing up.
press the PUSH OPEN button to slide
• Try another CD.
disc tray out. or,
• Make sure that Pause mode is not activated.
press while the program playback is • Make sure CD function is selected.
CD sound skips
stopped.
• Clean the CD.
Español
Información de la FCC
Este dispositivo cumple con la Parte 15 de
las Regulaciones de la FCC.
La operación está sujeta a las siguientes dos
condiciones:
(1) Este dispositivo podría no causar
interferencia dañina, y (2) este dispositivo
aceptará cualquier interferencia recibida,
incluyendo interferencia que pueda causar
una operación no deseada.
Este equipo se ha probado y se ha
encontrado que cumple con los límites de un
dispositivo digital Clase B, en conformidad
con la Parte 15 de las Regulaciones de la
FCC.
Estos límites se han diseñado para
suministrar protección razonable contra
EN
interferencia dañina en una instalación
residencial.
Este equipo genera, usa y puede irradiar
energía de radiofrecuencia y, si no se instala
y se usa de acuerdo a las instrucciones,
podría causar interferencia dañina en la
comunicaciones de radio.
Sin embargo, no se garantiza que la
interferencia no ocurrirá en una instalación
particular.
Si este equipo causa interferencia dañina a la
recepción de radio o televisión, lo que puede
determinarse al encender y apagar el equipo,
se exhorta al usuario a tratar de corregir la
interferencia por medio de una o más de las
siguientes medidas:
- Vuelva a orientar o a ubicar la antena
receptora.
- Aumente la separación entre el equipo y el
receptor.
- Conecte el equipo a un enchufe en un
circuito diferente a aquel en el que el
receptor está conectado.
- Consulte el distribuidor o un técnico de
Printed in China
radio / televisión experimentado.
Controles generales
F
(Unidad principal)
ON / STANDBY – enciende/apaga la unidad.
PRESET – accesa los canales de radio de
preselección; menú arriba/abajo del iPod/iPhone.
SOURCE – selecciona entre los modos radio,
iPod, CD, Aux.
TRACK / TUNE / – sintoniza en forma
ascendente o descendente la frecuencia de radio
(modo radio); busca/salta pistas hacia atrás o
hacia adelante (modo(CD/iPod).
STOP – detiene la reproducción (modo CD);
entra al modo menú (modo iPod).
PLAY / PAUSE – inicia o pausa la
reproducción de CD/iPod.
PROGRAM – establece los canales de
preselección de radio (modo radio); entra al modo
programa (modo CD): selecciona menú (modo
iPod).
MODE – selecciona el modo FM (modo radio);
selecciona entre el modo de reproducción
(normal/repetir 1/repetir todo/aleatorio) (modo
CD); selecciona entre los modos de reproducción
(normal/repetir 1/repetir todo/aleatorio 1/aleatorio
todo) (modo iPod).
EQ / DBBS – presione para seleccionar entre los
efectos de sonido (Flat/Rock/Jazz/Pop/Clásico);
para encender/apagar el DBBS (Sistema de
Realce de Bajos Digital / Digital Bass Boost
System).
E
VOLUME – ajusta el volumen.
PUSH OPEN – abre la puerta del CD.
PUSH TO CLOSE – empuje para cerrar la puerta
del CD.
AUX IN – conecta un dispositivo externo con un
cable de audio (no suministrado).
PHONE – conecta el audífono.
IPOD DOCK – conecta el iPod/iPhone.
Before you begin
the apparatus has been damaged in any
Safety precautions
way, such as power-supply cord or plug is
• Never open the cabinet under any
damaged, liquid has been spilled or objects
circumstances. Any repairs or internal
have fallen into the apparatus, the apparatus
adjustments should be made only by a trained
has been exposed to rain or moisture, does
technician.
not operate normally, or has been dropped.
• Do not touch the player with wet hands. If any
Important Battery Precautions
liquid enters the player cabinet, take the player to
CAUTION : Danger of explosion if battery is
a trained technician for inspection.
incorrectly replaced.
• This compact disc player uses a laser to read
Replace only with the same or
the music on the disc. The laser mechanism
equivalent type.
corresponds to the cartridge and stylus of a
• Any battery may present a risk of fire,
record player. Although this product incorporates
explosion, or chemical burn if abused. Do not
a laser pick-up lens, it is completely safe when
try to charge a battery that is not intended to
operated according to directions.
be recharged, do not incinerate, and do not
• The apparatus shall not be exposed to dripping
puncture.
or splashing and that no objects filled with liquids,
• Non-rechargeable batteries, such as alkaline
such as vases, shall be placed on the apparatus
batteries, may leak if left in your product for
a long period of time. Remove the batteries
AC power
from the product if you are not going to use it
Plug the power supply cord into the AC power
for a month or more.
jack on the back of the unit, and into an AC
• If your product used more than one battery:
power supply outlet that accepts the plug supplied
--Do not mix old and new batteries.
with your unit
--Do not mix alkaline,standard(carbon-zinc), or
rechargeable (Ni-CAD, Ni-MH, etc) batteries.
Battery power (Only dry battery can be used)
• Discard any leaky or deformed battery
You can insert 6 D-sized alkaline batteries (not
immediately. They may cause skin burns or
supplied) and you can take your stereo just about
other personal injury.
anywhere. Open the battery compartment door on
• Batteries shall not be exposed to excessive
the bottom of the unit by pressing down on the
heat such as sunshine, fire or the like.
arrow and pulling out the cover. Insert batteries in
• Please help to protect the environment by
the battery compartment.
recycling or disposing of batteries according
to federal, state, and local regulations.
Useful advice
• Do not use your system immediately after
transporting it from a cold place to a warm
place, as condensation may cause the system
to malfunction. If moisture forms inside this
system, it may not operate properly. To correct
the problem, turn off the power and wait about 30
Portable Cart
minutes for moisture to evaporate.
Warning
• This system is fitted with a laser. To avoid
accidents, it is to be dismantled by qualified
technicians only.
• Never leave the tray open as dust could cover
the laser lens and/or the tray could be bumped
into accidentally.
Radio
Selecting radio mode
Press
MODE the unit.
Press SOURCE until RADIO mode
EQ
DBBS
is selected.
Select FM mode
Press MODE to select between FM
mono and stereo.
Extend or reposition the
antenna for better FM
reception.
Remove the plastic tab
from the battery compart-
ment before first use.
One button type battery
Tuning to a station
(CR2025) is required.
Dispose of used battery
• Press
promptly. Keep away
frequency.
from children.
• Press
frequency.
Press and hold
automatically tune to the
next station.
More information
Cleaning the exterior
" lights on the display.
• Disconnect the system from AC power
before cleaning the exterior of the unit
with a soft dust cloth
.
• Clean the exterior with a soft clean
cloth or slightly moistened chamois
leather. DO NOT use solvents as it
may cause damage to the unit.
Handling CDs
• Do not touch the signal surfaces. Hold
CDs by the edges, or by one edge
and the hole.
• Do not affix labels or adhesive tapes to
the label surfaces. Do not scratch or
damage the label.
• Check CD for warping, scratches, or other
damage.
• CDs rotate at high speeds inside the
• Check for vibration or shock that may affect
player. Do not use damaged (cracked
the unit; move the set if necessary.
Remote control does not work
or warped) CDs
• Check that battery is properly installed.
• Make sure CDs are stored in their
• Replace weak battery.
• Point the remote directly at the unit's front original case after use. Keep them
panel.
away from damp, humid or abnormally
• Remove any obstacles between the remote
and the unit.
heated places.
CD lens care
• When your CD lens gets dirty it can
also cause the system to output poor
sound quality. To clean the lens you
ESD Remark:
In case of misfunction due to electrostatic discharge just reset
will need to purchase a CD lens
the product (disconnect and reconnect of the power source
may be required) to resume normal operation. cleaner which can maintain the output
sound quality of your system. For
instructions on cleaning the CD lens,
refer to the ones accompanying the
lens cleaner.
POR FAVOR LÉALO Y GUÁRDELO PARA REFERENCIA FUTURA
INSTRUCCIONES DE SEGURIDAD IMPORTANTES
ADVERTENCIA: Los cambios o las
Parte de la información presentada a continuación
podría no aplicar a su producto en particular; sin
modificaciones a esta unidad no aprobados de
embargo, como es el caso con cualquier producto
manera expresa por la parte responsable del
electrónico, deben observarse precauciones
cumplimiento podrían anular la autoridad del
durante el manejo y uso.
usuario a operar el equipo.
• Lea estas instrucciones.
Este producto cumple con el código 21 de las
• Guarde estas instrucciones.
Regulaciones del DHHS (Departamento de • Preste atención a todas las advertencias.
• Siga todas las instrucciones.
Salud y Servicios Humanos) CFR Subcapítulo
• No use este aparato cerca del agua.
J. Aplicable en la fecha de fabricación.
• Limpie usando un paño seco solamente.
Para su seguridad
• No bloquee ninguna abertura de ventilación.
Instale en conformidad con las instrucciones
En enchufe de CA está polarizado (una
del fabricante.
cuchilla es más ancha que la otra) y sólo
• No instale cerca de fuentes de calor tales como
encaja de una manera en los
radiadores, rejillas de calefacción, estufas, u
tomacorrientes de CA.
otros aparatos (incluyendo amplificadores) que
Si el enchufe no entra producen calor.
• No viole el dispositivo de seguridad del enchufe
completamente en el
polarizado o para conexión a tierra. Un enchufe
tomacorriente, voltee el
polarizado tiene dos cuchillas, una más ancha
enchufe y trate de introducirlo
que la otra. Un enchufe de conexión a tierra
de la otra forma.
tiene dos cuchillas y una tercera clavija para
Si aún no encaja, contacte un electricista conexión a tierra. La cuchilla más ancha o la
tercera clavija se suministra para su seguridad.
cualificado para cambiar el tomacorriente, o
Si el enchufe suministrado no cabe en su
use uno diferente.
tomacorriente, consulte un electricista para
No intente pasar por alto esta característica
reemplazar el tomacorriente obsoleto. Proteja el
de seguridad.
cable de alimentación de que lo pisen o de que
sea pinzado especialmente en los enchufes,
CUIDADO:
receptáculos, y en el punto en el que sale del
PARA EVITAR DESCARGAS ELÉCTRICAS, aparato.
• Use sólo los aditamentos / accesorios
HAGA CORRESPONDER LA CUCHILLA
especificados por el fabricante.
ANCHA DEL ENCHUFE CON LA RANURA
• Use sólo con el carrito, base, trípode, soporte
ANCHA DEL TOMACORRIENTE, DESPUÉS
o mesa especificados por el
INTRODÚZCALA COMPLETAMENTE.
fabricante, o vendida con el
ADVERTENCIA: aparato. Cuando se use un carrito,
tenga cuidado cuando mueva la
EL CABLE PRINCIPAL SE USA COMO UN
combinación carrito / aparato para
DISPOSITIVO DE DESCONEXIÓN Y DEBE
evitar daños por la inclinación.
PERMANECER LISTO PARA USARSE
• Desconecte este aparato durante
MIENTRAS SE LE DE EL USO DE LUGAR. tormentas eléctricas o cuando no se
use durante un período de tiempo prolongado.
PARA DESCONECTAR EL CABLE DE
• Refiera toda a reparación a personal calificado.
ALIMENTACIÓN COMPLETAMENTE DE LA
Se necesita reparación cuando el aparato se
FUENTE DE ALIMENTACIÓN, EL CABLE DE
daña de cualquier manera, como en caso de
ALIMENTACIÓN DEBE DESCONECTARSE
que se dañe el cable de alimentación o el
DEL TOMACORRIENTE COMPLETAMENTE.
enchufe, si se derrama líquido o si caen objetos
dentro del aparato, si el aparato se ha expuesto
Controles generales (Remoto y Pantalla)
– Enciende / apaga la unidad.
SOURCE – selecciona entre los modos radio, iPod, CD,
Aux.
MODE – selecciona el modo FM.
PRESET – accesa canales de radio de preselección.
Asciende o desciende en el menú iPod .
VOLUME +/- – ajusta el volumen.
EQ/DBBS – selecciona entre efectos de sonido (Flat/Rock/
Jazz/Pop/Clásico); presione y sostenga para encender/
apagar el DBBS (Sistema de Realce de Bajos Digital).
PROG – establece canales de preselección (modo radio)
y entra al modo de programa (modo CD).
/ – selecciona pistas y frecuencias de radio.
– inicia o pausa la reproducción.
– Detiene la reproducción.
MENU – entra al menú iPod.
ENTER – selecciona el menú resaltado.
SHUFFLE – selecciona entre modos aleatorios (off/
aleatorio 1/álbum aleatorio/todo aleatorio).
REPEAT – selecciona entre modos de repetición (off/
repetir 1/repetir álbum/repetir todo).
MUTE – silencia la salida de audio.
• Do not place the system near wet areas such
as bathrooms and pool side. Avoid storing the
system at humid places or near abnormally
heated areas.
• Power is continuously supplied to the system.
To disconnect power completely, unplug the
mains plug from the power outlet.
• Ensure minimum distance around the
apparatus for sufficient ventilation. The ventilation
should not be impeded by covering the ventilation
openings with items, such as newspaper, etc.
• No naked flame source, such as lighted
candles, should be placed on the apparatus.
• Attention should be paid to environment
aspects of battery disposal.
Headset safety
• Have a Blast-Just Not in your eardrums! Make
sure you turn down the volume on the unit before
you put on headphones. Increase the volume to
the desired level only after headphones are in
place.
• Do not play your headset at high volume.
Hearing experts warn against extended high-
volume play.
• If you experience ringing in your ears, reduce
volume or discontinue use.
• You should use with extreme caution or
temporarily discontinue use in potentially
hazardous situations.
Even if your headset is an open-air designed to
let you to hear outside sounds, do not turn up
the volume so high that you
are unable to hear what is
around you.
Setting preset stations
manually
ON / STANDBY to turn on
1. In radio mode.
2. Press / to select the
station to save as a preset
station.
3. Press PROGRAM. Program icon
flashes.
4. Press PRESET repeatedly
to assign the preset station
number.
5. Press PROGRAM to confirm.
Program icon stops flashing.
6. Repeat steps 2 to 5 to set
additional preset stations.
There are 20 preset
to tune down radio
locations on this unit
to tune up radio
Using presets
/ to
1. Press PRESET
repeatedly to access the desired
preset stations.
Cleaning CDs
• Dirty CDs can cause poor sound qual-
ity. Always keep CDs clean by wiping
them gently with a soft cloth from the
inner edge toward the outer perimeter.
• If a CD becomes dirty, wet a soft cloth
in water, wring it out well, wipe the
dirt away gently, and then remove any
water drops with a dry cloth.
• Do not use record cleaning sprays or
antistatic agents on CDs. Also, never
clean CDs with benzene, thinner,
or other volatile solvents which may
cause damage to disc surface.
a la lluvia o a la humedad, si no opera
normalmente, o si se ha dejado caer.
Información importante sobre las pilas
PRECAUCION : Peligro de explosión si la batería
es reemplazada incorrectamente.
Reemplace solamente con el
tipo de baterías especificado.
• Cualquier pila puede representar un riesgo de
incendio, explosión o quemadura química si se
abusa de la misma. No intente recargar una
pila que no se diseñó para recargarse, no la
incinere y ni la puncione.
• Las pilas no recargables, tales como las pilas
alcalinas, podrían presentar escapes si se dejan
dentro de su producto por un período de tiempo
prolongado. Retire las pilas del producto si no
lo va a usar durante un mes o más.
• Si su producto usa más de una pila:
- No mezcle las pilas nuevas con las viejas
- No mezcle pilas alcalinas, estándares (cinc-
carbón) o recargables (Ni-CAD, Ni-MH, etc).
• Elimine inmediatamente cualquier pila que
presente escapes o que esté deformada.
Las mismas pueden causar quemaduras en la
piel u otro daño personal.
• Las pilas no deben exponerse al calor excesivo,
como es el caso de la luz solar, el fuego o
similares.
• Por favor contribuya a proteger el medio
ambiente al reciclar o desechar las pilas de
acuerdo a las regulaciones federales, estatales
y locales.
Advertencia
de Carrito
Portátil
Radio
Selección del modo radio
Presione ON / STANDBY para encender la unidad.
Presione SOURCE hasta que el modo RADIO esté
seleccionado.
MODE
Selección del modo FM
EQ Presione MODE para seleccionar entre FM mono y
DBBS
estéreo.
Extienda o cambie la posición de la antena
para una mejor recepción FM.
Sintonización de una estación
• Presione para sintonizar la frecuencia de radio
descendente.
• Presione para sintonizar la frecuencia de radio
ascendente.
Presione y sostenga / para
sintonizar automáticamente la siguiente
Remueva la lengüeta
estación.
de plástico del
compartimiento de
Para establecer manualmente las estaciones de
baterías antes del
preselección
primer uso. Requiere
1. En modo radio.
de un tipo de batería
2. Presione / para seleccionar una estación a
de botón (CR2025).
guardar como estación de preselección.
Elimine las baterías
3. Presione PROGRAM. El icono de programa
usadas rápidamente.
parpadea.
Manténgalas lejos de
4. Presione PRESET repetidamente para asignar
los niños.
el número de estación de preselección.
5. Presione PROGRAM para confirmar.
El icono de Programa deja de parpadear.
6. Repita los pasos 2 a 5 para establecer estaciones
de preselección adicionales.
Hay 20 ubicaciones de preselección
Uso de preselecciones
1. Presione PRESET
repetidamente para accesar las estaciones de
preselección deseadas