Radio; Tuning To A Station; Setting Preset Manually; Auto Preset - RCA RCD147 User Manual

Radio

Tuning to a station

EN
1. Press STANDBY/ON button to turn power
on.
2. Press RADIO/BAND to select between AM
and FM band.
3. Press TUNE DOWN/BACK
NEXT to select radio station.
4. Press VOLUME + / - to adjust to your desired
listening level.
Tip Tip: Tip Tip Tip
Extend or reposition the antenna for
better FM reception. Move the unit
for better AM reception.
Tip: Tip Tip Tip Tip
Press and hold TUNE DOWN/BACK
or TUNE UP/NEXT
more than 1 second to automatically tune to
the next station.
5
or TUNE UP/
TUNE DOWN/BACK TUNE DOWN/BACK TUNE DOWN/BACK TUNE DOWN/BACK
TUNE UP/NEXT TUNE UP/NEXT
TUNE UP/NEXT TUNE UP/NEXT for
Setting presets manually
1. Press RADIO/BAND to select between AM/
FM.
2. Press TUNE DOWN/BACK
NEXT to access the desired frequency.
3. Press SET to enter preset programming
mode.
4. Press PLAY MODE/PRESET UP repeatedly to
assign program number.
5. Press SET to confirm.
6. Repeat steps 2 to 5 to preset to a maximum
of 10 channels for FM & AM band.

Auto preset

Press and hold RADIO/BAND to set presets
automatically. The display will show AUTO.
Once a station is found, the search stops briefly
to allow you to listen to the station.
• Press TUNE DOWN/BACK
NEXT at this time if you decide not to
store selected station.
• If you decide to store the station in preset
memory, wait a few seconds and the search
will resume.
Using presets
1. Press RADIO/BAND to select radio band.
2. Press PLAY MODE/PRESET UP to enter
preset mode and PRESET 1 shows.
3. Press PLAY MODE/PRESET UP repeatedly to
access your desired preset stations.
or TUNE UP/
or TUNE UP/