Remote Control Battery Installation; Display - RCA RCD147 User Manual

General Controls
Remote Control Battery
EN
Installation
The remote control must be inserted with 2
"AAA" or "UM-4" or "R03" batteries prior to
use. Follow the steps below to ensure correct
installation.
1. Remove the battery compartment door
(located at the back of the remote control)
by pushing the door in the direction of the
arrow marked OPEN and lifting it off the
cabinet.

Display

FM Radio Bands
Preset EQ settings
Rock, Jazz, Pop,
Classic, Flat
Tuner
frequency unit
- AM / PM indicator
- AM Radio Band
3
Repeat mode
- REPEAT - repeat whole disc
FM stereo
- flashing REPEAT - repeat
signal is
current track
detected.
Showing clock, date, elapsed/
remaining playback time,
radio frequency, preset tuner
station, etc.
2. Before inserting the batteries, observe the
polarities (that is, + and -) of the battery,
then relate the polarities to the engraved
diagram inside the battery compartment.
Now insert the batteries.
3. After installation of the batteries, replace
and fit the battery compartment door to
cover the batteries. Lightly push it close
with a snap.
Random
playback
Digital Bass
Boost System
- Volume level when
adjusting volume
In CD mode
- Track number (shows
during disc playback)
- Program location
In Tuner mode
- Preset location