Troubleshooting; Maintenance - Delphi SA10201 - Boom Box Audio System Installation And Operation Manual

2. On placement:
• Do not place the Delphi Audio System on an inclined or unstable surface.
• Do not place anything within 1/2" of the side of the cabinet. The audio/ventilation ports must
be unobstructed for the Delphi Audio System to operate properly and prolong the life of its
components.
• Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding
or spring-wound watches away from the unit to prevent possible damage from the magnetic fields.
3. Do not immerse in water.
• This product is not meant to be immersed in water or come in continuous contact with water.
• Before opening or shutting the receiver cradle or battery compartment panel, be sure to wipe off
water, dust, or sand on the outside of the unit.
• If the Delphi Audio System is splashed with salt water, wipe clean with a damp cloth, and then dry
with a soft dry cloth. Do not wash under running water; do not use soap or detergent; do not dry
with an electric hair dryer.
• The supplied AC power adaptor is not water resistant. To prevent shock hazard, avoid using the
Delphi Audio System near water during AC operation.
• Water in the headphone jack may cause rusting and possible malfunction.

Troubleshooting

1. The power is not on:
• Connect the AC power adaptor to a wall outlet securely and make sure the wall outlet has
110V AC output.
• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if they are weak.
2. There is no audio:
• Unplug the satellite radio receiver from the Delphi Audio System and re-insert it.
3. Noise is heard coming through the Delphi Audio System:
• Someone is using a portable telephone or other equipment that emits radio waves near the
antenna (~2.3GHz). To solve this problem, move the portable telephone, etc. away from the unit.

Maintenance

To clean the cabinet panel and controls, use a soft cloth slightly moistened with a mild detergent solution.
Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzene.
Note: Unplug the AC power adaptor before cleaning to avoid any electric shock hazard.
10