Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Delphi SA10201 - Boom Box Audio System
Summary of Contents for Delphi SA10201 - Boom Box Audio System
- Page 1 Delphi Audio System Installation & Operation Guide...
- Page 2 Owner’s Record The model number is located below and the serial number is located on the label on the rear of the Delphi Audio System. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your dealer regarding this product.
-
Page 3: Table Of Contents
Using SKYFi/SKYFi2 with the Delphi Audio System ........ -
Page 4: What's In The Box
To reattach the panel, line up all six tabs and then slide the panel toward the front of the unit until a click is heard. Make cer- tain that all six tabs are engaged and the rear of... -
Page 5: Using Skyfi/Skyfi2 With The Delphi Audio System
Delphi Audio System. Then letting the cradle tilt forward, carefully slide the adaptor down into the tray so that the alignment tabs on the sides of the tray line up with the slots on the adaptor and the connector is completely seated. Push on the top center above the display of the adaptor so that it tilts back into the Delphi Audio System until a click is heard. -
Page 6: Using The Delphi Audio System With Batteries
In some cases, it will be possible to receive the XM signal through standard home walls or a roof. -
Page 7: Installing The Xm Antenna On The Rear Of The Delphi Audio System
Installing the XM Antenna on the Rear of the Delphi Audio System When outdoors with a view of the southern sky, or in an area of repeater coverage, or when receiving a strong signal indoors, you can conveniently mount the antenna directly on the back of the Delphi Audio System. -
Page 8: Using The Delphi Audio System
2. Attach four screws to the wall using the screw-locator pattern shown here. Photocopy the pattern to use as a template. Use screws with head sizes small enough to fit in the center of each of the four holes but large enough not to pop out of the elongated sections. -
Page 9: Bass & Treble
Note that the “Line Out Level” cannot be reset while the receiver is in the Delphi Audio System since the volume control should be used to control the audio output instead. If the line out setting is adjusted while in a car cradle or home stand and the receiver is later reconnected to the Delphi Audio System, it will automatically return to the prior setting the next time it is used in a vehicle adaptor or home adaptor. -
Page 10: Troubleshooting
• If the Delphi Audio System is splashed with salt water, wipe clean with a damp cloth, and then dry with a soft dry cloth. Do not wash under running water; do not use soap or detergent; do not dry with an electric hair dryer. -
Page 11: Specifications
The duration of Delphi’s warranty with respect to each Product is limited to one (1) year from the date of sale to the original consumer purchaser. No other express warranties are made with respect to any Product. All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited to the warranty period set forth above. - Page 12 The duration of Delphi's warranty with respect to each Product is limited to one (1) year from the date of sale to the original consumer purchaser. Delphi makes no express warranties with respect to any Product except as set forth herein. All implied conditions and warranties, includ- ing the implied conditions and warranties of merchantable quality and fitness for a particular purpose are limited to the warranty period set forth above.
Need help?
Do you have a question about the SA10201 - Boom Box Audio System and is the answer not in the manual?
Questions and answers