Rear Panel
5-port 10/100M NWay Fast Ethernet Switch
8-port 10/100M NWay Fast Ethernet Switch
DC Power Jack: Power is supplied through an
external AC power adapter.
specification section for information about the AC
power input voltage.
Since the switch does not include a power switch,
plugging its power adapter into a power outlet will
immediately power it on.
MDI-X Jacks: Use these jacks to connect stations
to the hub. These are MDI-X (Medium-Dependent
Interface, Cross-wired) jacks, which mean, you can
use ordinary straight-through twisted-pair cables
Check the technical
10