Switch To Switch (Other Devices); Using Straight Cable; Using Crossover Cable - TRENDnet TE100-S55E User Manual

Switch to Switch (other devices)

The Switch can be connected to another switch or
other devices (routers, bridges, etc.) via a two-pair
Category 3, 4, 5 UTP/STP straight or crossover cable.
A. Using straight cable
When using straight cable, this is done from the
uplink (MDI-II) port of the Switch (Switch A) to any of
the 10Mbps or 100Mbps (MDI-X) port of the other
switch (switch B) or other devices.
B. Using crossover cable
When using crossover cable, this is done from any
(MDI-X) port of the Switch (Switch A) to any of the
10Mbps, 100Mbps (MDI-X) port of the other switch
(switch B) or other devices.
1. The 100LINK/ACT,10LINK/ACT
indicator light green for hookup to 100Mbps
speed or light amber for hookup to 10Mbps
speed.
2. The FDX 10/100,COL 10/100 LED indicator
depends upon device's capabilities for full-duplex
or half-duplex
16
LED