Rear Panel - TRENDnet TE100-S16 User Manual

connection is 10Mbps or there is no connection.
Twisted-Pair Ports
These ports supports automatic MDI-II/MDI-X crossover detection
function gives true "plug-and-play" capability without the need of
confusing crossover cables or crossover uplink ports.
With the Auto-MDI function, you just need to connect the network
cable to the Switch; it does not matter if the end node is NIC (Network
Interface Card) or other Ethernet port.

Rear Panel

AC Power Connector
Connect the power cord's female end to this connector. Please note
that there is no Power On/Off switch on this Switch. When the power
cord is connected to the Switch and the correct power source, the
Switch is powered on.
9