1. Verify that any software required to operate your printer or multi-function printer is installed before installing the TE100-MFP1. 2. Do not install the TRENDnet USB Control Center utility and connect your printer to the TE100-MFP1 until instructed to do so.
2. Installation 1. Connect the print server to one of the ports on your wired network with the provided network cable. 2. Plug in the power adapter and move the power switch to the “On” position. ON/OFF Internet 3. Connect your printer to the USB port on the print server.
Page 4
6. Install the Control Center utility for each computer that requires access to the print server by inserting the Utility CD on each computer. 7. Follow the InstallShield Wizard 11. To save time and avoid manually instructions. Then click Finish.
Need help?
Do you have a question about the TE100-MFP1 and is the answer not in the manual?
Questions and answers