CareCo MAXLITE FN08010010 Assembly Instructions Manual
CareCo MAXLITE FN08010010 Assembly Instructions Manual

CareCo MAXLITE FN08010010 Assembly Instructions Manual

Overbed tilt-top table

Advertisement

M A X L I T E O V E R B E D T I L T - T O P T A B L E
PRODUCT CODE: FN08010010
BEFORE USE
Please ensure you, and any persons that will assist you in its use, take the time to read,
understand and follow the instructions in this user manual.
This table is intended to provide a flat, stable surface for activities and small tasks. When
using as an overbed table, the gap measurement between the footboard/headboard and the
table must be less than 60mm or greater than 318mm to minimise the risk of entrapment.
We strongly recommend that you keep the box and internal packaging for the duration of
your warranty period.
SAFETY GUIDELINES
Do not exceed the maximum load of 25KG.
Do not place hot objects directly onto the table.
Beware of finger traps/pinch points when lifting, adjusting, and transporting the table.
Ensure the floor surface supporting the table is level.
Never sit or lean on the table.
Scan me on your
phone camera
to watch our
assembly video.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAXLITE FN08010010 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CareCo MAXLITE FN08010010

  • Page 1 Scan me on your phone camera to watch our assembly video. M A X L I T E O V E R B E D T I L T - T O P T A B L E PRODUCT CODE: FN08010010 BEFORE USE Please ensure you, and any persons that will assist you in its use, take the time to read, understand and follow the instructions in this user manual.
  • Page 2: Getting Started

    Qty: Qty: Phone/Tablet Holder Walking Stick / Cane Qty: Qty: Holder Contact CareCo immediately if any of the listed contents are missing. We strongly recommend that you keep the box and internal packaging for the duration of your warranty period.
  • Page 3 PRODUCT CODE FN08010010 SETTING UP YOUR TABLE 1. Remove all components from the outer 2. Insert Castors (G) into the front of the packaging and place them onto a level Table Base (E) and secure. surface. 3. Insert Locking Castors (F) into the rear of 4.
  • Page 4 5. Slide Tube Extension (D) on to Table 6. Insert Side Table (B) into the Table Upright Upright (C) Tube. (C) and secure with E-Clip (K) An audible “click” will confirm the tube is secure. 7. Slide Table Top (A) onto Table Upright (C) Your MaxLite Adjustable Table is now ready tube.
  • Page 5: Height Adjustment

    PRODUCT CODE FN08010010 ADJUSTMENTS HEIGHT ADJUSTMENT 1. Twist the table knob anticlockwise to loosen Table Upright (C) 2. Lift or lower the Table Top (A) to the desired height. 3. Twist the table knob clockwise to secure. ANGLE ADJUSTMENT 1. Press & hold the Table Upright Lever. 2.
  • Page 6 ACCESSORIES WALKING STICK/CANE HOLDER ATTACHING Insert walking stick/cane holder (M) into the edge of tabletop (A). REMOVING Pull walking stick/cane holder (M) away from tabletop (A). PHONE/TABLET HOLDER ATTACHING Hook phone/tablet holder (N) over the edge of the tabletop (A). REMOVING Unclip phone/tablet holder (N) from the edge of the tabletop (A).
  • Page 7: Maintenance Schedule

    PRODUCT CODE FN08010010 LOOKING AFTER YOUR ADJUSTABLE TABLE CLEANING To keep the table in optimal condition, it should be cleaned regularly with a damp cloth and/ or mild soap. Do not use abrasive cleaners/materials. Dry the table thoroughly with a towel after cleaning. MAINTENANCE SCHEDULE Carry out regular inspections to keep the table in optimum condition.
  • Page 8: Specifications

    DISPOSAL Disposal or recycling of the table should be completed through an approved distributor or disposal facility. (Local disposal & recycling regulations may apply) Contact CareCo if further advice is needed regarding recycling & disposal. SPECIFICATIONS OVERALL LENGTH (MM) OVERALL WIDTH (MM)
  • Page 9: Warranty

    • The table being purposely damaged or mistreated In the unlikely event that this table is recalled, CareCo will notify the user. Please ensure that your contact information is up to date. Alternatively, please visit our website for any table alerts: www.CareCo.co.uk...
  • Page 10 NOTES...
  • Page 11 PRODUCT CODE FN08010010 NOTES...
  • Page 12 2407-01 CareCo (UK) Limited, 1 Turing Court, Tel: 0333 015 5000 Great Notley, Braintree, CM77 7AT www.CareCo.co.uk...

Table of Contents