Advertisement
Quick Links
TV Wall Mount Instruction Manual
V4.0(A)
Model: PGMTK1/PGMTK1D
English
------------------------ 01-11
Thank you for choosing this Perlegear product! At Perlegear we strive to provide
you with the best quality products and services in the industry. Should you have
any issues, please don't hesitate to contact us at
Technical Support:
(US/CA)1-800-456-5231 Mon-Fri 8am - 8pm(CST)
(UK)44-808-196-4165 Mon-Fri 2pm - 10pm(UTC)
Other Info:
support@perlegear.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Perlegear PGMTK1
Summary of Contents for Perlegear PGMTK1
- Page 1 Model: PGMTK1/PGMTK1D English ------------------------ 01-11 Thank you for choosing this Perlegear product! At Perlegear we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us at...
-
Page 2: Important Safety Information
Please carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact our customer service at support@perlegear.com. CAUTION: Avoid potential personal injuries and property damage! • Do not use this product for any purpose that is not explicitly specified in this manual. - Page 3 Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. lf you require replacement parts, please contact our customer service at support@perlegear.com. • Please note: Not all hardware included in this package will be used.
- Page 4 TV Bolts (Only one bolt size fits your TV) Note: The bolts are shown in actual size M4 x 12mm M4 x 30mm [B1] [B2] M6 x 15mm M6 x 35mm [C1] [C2] M8 x 25mm M8 x 50mm [D1] [D2] Supplied Parts and Hardware for Step 2 Wall Plate...
- Page 5 Correct Correct Note: If necessary, the spacers can be used in multi-layer. If the installation fails after trying various methods, please contact customer service at support@perlegear.com. CAUTION: Ensure the TV brackets [ 02 and 03 ] are EQUALLY CENTERED on your TV and securely fastened in place.
- Page 6 Option A (For Flat Back B1/C1/D1 E1/E2 F1/F2 Needed) Alternate Spacer Setups Note: Keep the arrow up Option B (For Round Back TV) B2/C2/D2 E1/E2 F1/F2/F3 Alternate Spacer Setups Note: Keep the arrow up...
- Page 7 Option C (For TV with A “Bump”) B2/C2/D2 F/D2/E2/E3 E1/E2 (If needed) F1/F2/F3 B2/B3/B4 Alternate Spacer Setups Note: Keep the arrow up Option D For cable interference or inset holes, use spacers [F1], [F2] and [F3] to create extra space between the TV and TV brackets. F1/F2/F3 B2/C2/D2 E1/E2...
- Page 8 Step 2 Attach the Wall Plate [01] to Wall For wood stud installation, follow STEP 2A For concrete installation, follow STEP 2B Step 2A Wood Stud Option WARNING: Avoid potential personal injury or property damage! DO NOT over-tighten the lag screws [A1]. Tighten the lag screws [A1] only until they are pulled firmly against the wall plate [01].
- Page 9 2A-2 Position the wall plate at your desired height and line up the holes with your stud center line. Level the wall plate and mark the holes. 2A-3 Drill 4 pilot holes using a 7/32 in (5.5mm) diameter drill bit. Make sure the depth is not less than 2 3/4 in (70mm).
- Page 10 Step 2B Solid Concrete or Concrete Block Option WARNING: Avoid potential personal injury or property damage! DO NOT over-tighten the lag screws [A1]. Tighten the lag screws [A1] only until they are pulled firmly against the wall plate [01]. Ensure the wall plate is securely fastened to the wall before continuing to the next step.
- Page 11 2B-3 Use the hammer to knock Install wall plate [01] using lag screws [A1]. anchors [A2] into the wall. DO NOT over-tighten the lag screws [A1]. Be sure the anchors [A2] Tighten the lag screws [A1] only until they are seated flush with the are pulled firmly against the wall plate [01].
- Page 12 Step 4 Secure the TV onto the Wall Plate HEAVY! You may need assistance with this step. Wall Locking To Hang TV onto Wall Plate 1. Hang the TV with brackets [02] and [03] onto the wall plate [01]. 2. While pulling and hold both ropes [R] , press the bottom of the TV into the wall plate [01] until the latches lock the TV brackets [02] and [03], then release the ropes.
Need help?
Do you have a question about the PGMTK1 and is the answer not in the manual?
Questions and answers