Advertisement
English
Deutsch
Français
Español
Italiano
Thank you for choosing this Perlegear product! At Perlegear, we strive to
provide you with the best quality products and services in the industry. Should
you have any issues, please don't hesitate to contact us.
Technical Support:
(US / CA) 1-800-456-5231 Mon-Fri 8am - 8pm (CST)
(UK) 44-808-196-4165 Mon-Fri 2pm - 10pm (UTC)
Other Info: support@perlegear.com
AMZLAB GmbH
Laubenhof 23,45326 Essen
THEMIS AR support ltd.
85 Great Portland St, London, United Kingdom.
Manufacturer: BESTQI INNOVATION (HONG KONG) TECHNOLOGY CO., LIMITED
Address: RM 21 UNIT A 11/F TIN WUI IND BLDG NO 3 HING WONG ST TUEN MUN NT HONG KONG
TV Wall Mount
Instruction Manual
Model：PGMFK6
------------------------ 01-11
------------------------ 12-22
------------------------ 23-33
------------------------ 34-44
------------------------ 45-55
(C)
Advertisement
Table of Contents
Related Manuals for Perlegear PGMFK6
Summary of Contents for Perlegear PGMFK6
- Page 1 ------------------------ 34-44 Italiano ------------------------ 45-55 Thank you for choosing this Perlegear product! At Perlegear, we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us.
-
Page 2: Important Safety Information
If your TV VESA is greater than 400 x 400mm / 15.7 x 15.7” or less than VESA 75 x 75mm / 3 x 3”, this mount is NOT compatible. If this mount is NOT compatible, please contact customer service at support@perlegear.com to find a compatible mount. Verify Your Wall Construction CAUTION... -
Page 3: Supplied Parts And Hardware
Do not use damaged or defective parts. lf you require replacement parts, please contact our customer service at support@perlegear.com. • Please Note: Not all hardware included in this package will be used. Supplied Parts and Hardware for Step 1... - Page 4 Note: The bolts are shown in actual size. TV Bolts [Only one bolt fits your TV] M4 x 12mm M4 x 30mm [C1] [C2] M6 x 15mm M6 x 35mm [D1] [D2] M8 x 25mm M8 x 50mm [E1] [E2] Supplied Parts and Hardware for Step 3 Note: The lag screw is shown in actual size.
- Page 5 Step 1 Choose the Combination that Applies to Your VESA Hole Pattern Option A No Need to Attach Extender Brackets [02] and [03] to Faceplate 200mm 100mm For VESA hole pattern: 75mm 3 x 3” (75 x 75mm) 3.9 x 3.9” (100 x 100mm) 7.9 x 3.9”...
- Page 6 PLEASE NOTE: When using the spacers, it is important to note that they can be used in multi-layers (meaning stacked). If you have any difficulty understanding how to install the TV bolts or spacers, please contact customer service at support@perlegear.com. CAUTION: Ensure the faceplate [01A] or...
- Page 7 Option B (For Round Back TV) C2 / D2 / E2 B1 / B2 F1 / F2 / F3 Alternate Spacer Setups Option C (For TV with A “Bump”) C2 / D2 / E2 B1 / B2 F1 / F2 / F3 Alternate Spacer Setups Option D For cable interference or inset holes, use...
- Page 8 Step 3 Attach the Arm Assembly / Wall Plate [01B] to Wall For wood stud installation, follow STEP 3A For concrete installation, follow STEP 3B Step 3A Wood Stud Option WARNING: ●Avoid potential personal injury or property damage! Do not use a drill for tightening the lag screws! Only use a socket wrench.
- Page 9 3A-4 Install the arm assembly / wall plate [01B] using lag screws [A1]. Tighten the lag screws [A1] only until they are pulled firmly against the wall plate. 7/16” (11mm) Socket Wrench (Not Included) Step 3B Solid Concrete or Concrete Block Option WARNING: ●Avoid potential personal injury or property damage! Do not use a drill for tightening the lag screws! Only use a socket wrench.
- Page 10 3B-2 Drill 4 pilot holes using a 3/8” (10mm) diameter drill bit. Make sure the depth is not less than 3” (75mm). Never drill into the mortar between blocks. 3” (75mm) Electric Drill 3/8” (10mm) (Not lncluded) 3B-3 Use the hammer to knock anchors [A2] into the wall.
- Page 11 Step 5 Secure the TV onto the Arm Assembly / Wall Plate [01B] 5-1 Loosen the preassembled bolt [S1] and keep it for use in step 5-3. 5-2 Hang the TV to the arm assembly / wall plate [01B], making sure the upper nut hangs on the hook on the arm assembly / wall plate [01B].
-
Page 12: Level Adjustment
Step 6 Adjustments 6-1 Level Adjustment If needed, the TV can be levelled. Phillips Screwdriver (Not Included) 1. Slightly loosen the bolt [S1]. 7/16” (11mm) 2. Level your TV. Socket Wrench 3. Retighten the bolt [S1] to hold TV in place. (Not Included) 6-2 Tilt Adjustment Loosen...