Advertisement
Quick Links
Table Top TV Stand Instruction Manual
Rev00(A)
Model: PGTVS02
Thank you for choosing this Perlegear product! At Perlegear, we strive to
provide you with the best quality products and services in the industry. Should
you have any issues, please don't hesitate to contact us.
Technical Support:
(US / CA) 1-800-456-5231 Mon-Fri 8am - 8pm (CST)
(UK) 44-808-196-4165 Mon-Fri 2pm - 10pm (UTC)
Other Info:
support@perlegear.com
Advertisement
Related Manuals for Perlegear PGTVS02
Summary of Contents for Perlegear PGTVS02
- Page 1 Table Top TV Stand Instruction Manual Rev00(A) Model: PGTVS02 Thank you for choosing this Perlegear product! At Perlegear, we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us.
- Page 2 15.7" or less than VESA 75 x 75mm / 3 x 3", this TV stand is NOT compatible. If this TV stand is NOT compatible, please contact customer service at support@perlegear.com to find a compatible mount. Tools Needed (Not lncluded) 7/16'' (11mm)
- Page 3 Before starting assembly, verify all parts are included and undamaged. Do not use damaged or defective parts. lf you require replacement parts, contact customer service at support@perlegear.com. • PLEASE NOTE: Not all hardware included in this package will be used.
- Page 4 (01) x 2 TV Bracket Supplied Parts and Hardware for Step 2 NOTE: The bolt is shown in actual size. (G3) x 1 (G1) x 1 (G2) x 1 (G4) x 1 5/32” (4mm) Top Cover Plastic Cover Washer Allen Key (a) x 2 M6 Bolt (G5) x 1...
- Page 5 PLEASE NOTE: When using the spacers it is important to note that they can be used in multi-layers (meaning stacked). If you have any difficulty under- standing how to install the TV bolts or spacers, please contact customer service at support@perlegear.com. CAUTION: Ensure the TV brackets [01] are EQUALLY CENTERED on your TV and securely fastened in place.
- Page 6 Option A (For Flat Back C1 / D1 / E1 B1 / B2 F1 / F2 (If needed) (If needed) Alternate Spacer Setups Option B (For Round Back TV) C2 / D2 / E2 B1 / B2 F1 / F2 / F3 Alternate Spacer Setups Option C (For TV with A “Bump”)
- Page 7 Option D For cable interference or inset holes, use spacers [F1], [F2] and [F3] to create extra space between the TV and TV brackets. F1 / F2 / F3 C2 / D2 / E2 B1 / B2 Alternate Spacer Setups Step 2 Assemble the Base Place foot pads [G6] to the painted side of the tempered glass Step 2-1...
- Page 8 Step 2-2 Connect the support pillar [02] to tempered glass base [03] Attach the top cover [G1] to the support pillar [02]. Secure the support pillar [02] to tempered glass base [03] using plastic cover [G2], washer [G4], EVA pad [G5], bolts [a] and Allen key [G3]. HEAVY! You may need assistance with this step.
- Page 9 Step 3 Connect the TV Plate [04] to Support Pillar [02] NOTE: There are three choices for The First Choice height adjustment. You can choose your desired height position while The Second Choice connecting the TV plate [04] to The Third Choice support pillar [02].
- Page 10 Adjust the Level Angle Level 1. Slightly loosen the three bolts. 2. Level the TV plate. 3. Retighten the three bolts to secure the TV plate in place. Attach TV to the TV Plate and Manage the Wires Slightly loosen the bolts [S] on both brackets. Hang the TV with brackets to the TV plate.
- Page 11 Step 4 Secure the Wire Clips [H1] to Support Pillar [02] [NOT Included] Step 5 Manage the Wires...
- Page 12 Thank you again for choosing this Perlegear product! All of us at Perlegear do appreciate your product purchase. We hope that you are as happy with your product as we are designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.