Perlegear PGMTK1 Quick Start Manual

MEDIUM TILT
TV WALL MOUNT
For
23"-55"
(58-140 cm)
TVs
Model PGMTK1
Tools:
Stud Awl or Pencil Level
Finder Thin Nail (included
inside the box)
7/32 in. 1/2 in. Screw
Drill
(5.5 mm) (12.7 mm)
driver
Wood Drill Socket
STEP 1-1 STEP 1-2
Select TV Screw Diameter
If your TV has a flat back AND you want your TV closer to
Hand thread screws into the threaded inserts
the wall, use the shorter screws (A).
on the back of your TV to determine which
screw diameter (M4, M5, M6, or M8 ) to use.
Use the spacers and longer screws (B) to accommodate:
M4 M5 M6 M8
A
Does your TV weight more
than 66 lbs. (30 kg) including
accessories?
No — Perfect!
Yes — This mount is NOT compatible.
WARNING:
capacity can result in serious personal injury
or damage to equipment! It is the installer's
responsibility to make sure the weight of the
TV (with accessories) does not exceed 66 lbs
(30 kg).
WARNING:
This
Wall Plates
product contains small
items that could be
a choking hazard if
swallowed.
Before starting
assembly, verify all
parts are included and
undamaged. If any parts
are missing or damaged,
do not return the
damaged item to your
dealer; contact Customer
Service. Never use
damaged parts!
x1
01
Select TV Screw Length
• Round/irregular back TVs
• TVs with inset mounting holes
• Extra space needed for cables
B
FLAT BACK ROUND BACK INSET HOLES CABLES
What is your wall made of?
66 lbs.
(30 kg)
Perfect!
Exceeding the weight
?
Contact Customer Service:
customerservice@perlegear.com
Right TV Left TV Hardware
Bracket Bracket
Lag Bolts
5/16 x 2½ in
x4
03 x1 A
02 x1
STEP 1-3
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
Position your TV
at customerservice@perl
bracket configuration
egear.com
(A or B) over your TV
hole pattern - making
CAUTION:
sure the bracket is
Verify adequate thread
engagment with the screw or centered over the
screw/spacer combination.
TV hole pattern and
- Too short will not hold the TV. level. Secure bracket
- Too long will damage the TV. using your screw/
washer (A-Flat Back)
or spacer/screw/
Too Short
washer (B-Round
Back / Extra Space)
selection.
CAUTION:
Correct Ensure TV bracket
is securely fastened
before moving on to
the next step.
Too Long
Please read through these instructions completely to be sure you're comfortable with
this easy install process. Also check your TV owner's manual to see if there are any
special requirements for mounting your TV.
Drywall with
If you do not understand these instructions or have doubts about the safety of the
wood studs?
installation, assembly or use of this product, contact Customer Service at
customerservice@perlegear.com
CAUTION:
Avoid potential personal injuries and property damage!
● This product is designed for use in wood stud walls - DO NOT install into drywall alone
● The wall must be capable of supporting fi ve times the weight of the TV and mount combined
● Do not use this product for any purpose not explicitly specifi ed by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
TV Screws / Washers
(Wall / Procduct)
Philips Screws Philips Screws
Washers
Allen
M4 x 12mm M5 x 12mm
Ø8mm Wrench
M4 x 30mm M5 x 30mm
x4 x1 x4 x4 x4 x4
C
B
Attach the TV Bracket
A
03
B
03
Philips Screws Philips Screws Spacers Washers Spacers
M6 x 15mm M8 x 15mm L10mm Ø6mm L5mm
M6 x 30mm M8 x 30mm M4-5-6
x4 x4 x4 x4 x4 x4
M-G M-H M-I M-J
M-A M-C
M-E M-G
02
M-J
M-B M-D
M-F M-H
02
M-J
M-K
M-I
x8
M-K
Rev.02