Table of Contents
Advertisement
Quick Links
BroilVection
JF93 Gas Dual Belt EMEA
Owner's Manual
A P P R OVA L S :
FOR CE APPROVED AUTOMATIC BROILERS
F O R Y O U R S A F E T Y :
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other
appliance.
W A R N I N G :
Improper installation, adjustment, alteration, maintenance can cause property damage, injury, or death.
Read the installation, operating and maintenance instructions thoroughly before installing or servicing
this equipment.
Broiler area must be kept free of combustible materials, and the flow of combustion and ventilation air
must not be obstructed. Operating personnel must not perform any maintenance or repair
functions. Contact your Nieco Authorized Dealer.
IMPORTANT: RETAIN THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE
™
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nieco BroilVection JF93
Summary of Contents for Nieco BroilVection JF93
- Page 1 Broiler area must be kept free of combustible materials, and the flow of combustion and ventilation air must not be obstructed. Operating personnel must not perform any maintenance or repair functions. Contact your Nieco Authorized Dealer. IMPORTANT: RETAIN THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE...
- Page 2 Broiler area must be kept free of combustible materials, and the flow of com- bustion and ventilation air must not be obstructed. Operating personnel must not perform any maintenance or repair functions. Contact your Nieco Authorized Dealer. Do not use this appliance in an area where a water jet could be used.
-
Page 3: Installer Notes
3. This appliance must be installed by a qualified installer, in compliance with all national, local regulations and institutions having jurisdiction. 4. This machine should be connected to the supply with a plug with proper grounding. Nieco Corporation - JF93G Dual Belt EMEA... -
Page 4: Table Of Contents
H. specifications ..........39 Nieco Corporation - JF93G Dual Belt EMEA... -
Page 5: General Information
This manual provides the safety, installation and operating procedures for the Nieco Automatic Broiler Model JF93. We recommend that all information contained in this manual be read prior to installing and operating the broiler. -
Page 6: Service/Technical Assistance
Authorized Nieco Distributors and Service Agencies will void the warranty and may significantly alter the performance of your broiler. The use of non-Nieco parts is capable of affecting these criteria, and may affect broiler performance, parts longevity and food safety. Your local Authorized Nieco Distributor and Service Agent has been factory trained and has a complete supply of parts for your Nieco Automatic Broiler. - Page 7 Distributor for adjustment or repair. • Use only genuine Nieco replacement parts for your broiler. Failure to do so will void the warranty and may significantly alter the performance of your broiler. The use of non-Nieco parts is capable of affecting these criteria, and may affect broiler performance, parts longevity and food safety.
-
Page 8: Machine Installation
12” (305 mm) 0” (0 mm) 0” (0 mm) Sides of broiler 12” (305 mm) 0” (0 mm) 0” (0 mm) Front of broiler 12” (305 mm) 0” (0 mm) 24” (610 mm) (Feed end) Nieco Corporation - JF93G Dual Belt EMEA... -
Page 9: Gas Connection
"lazy" loop for minimum tension. note: Gas appliances should be disconnected prior to maximum movement. (Minimal movement is possible to connect hose.) Nieco Corporation - JF93G Dual Belt EMEA... -
Page 10: Operation
4. Ignition failure light. This light will flash if the broiler burners fail to ignite. Cycle the on/off switch to reset. Check the troubleshooting guide if the broiler fails to light. Nieco Corporation - JF93G Dual Belt EMEA... - Page 11 3. ADJUSTMENT BUTTONS - Use to adjust product cook times, element settings and product names. 4. SELECTION INDICATOR LIGHT - Lights up to show which button is selected. Multi-speed control P/N 15161-B Nieco Corporation - JF93G Dual Belt EMEA...
-
Page 12: Step-By-Step Lighting Procedure
If this still doesn’t light the broiler, see the MANUAL IGNITION instructions. 1. Turn the MaIn PoWeR sWITCH on. 2. Allow broiler to heat for 45 minutes before cooking. Nieco Corporation - JF93G Dual Belt EMEA... -
Page 13: Manual Ignition
Your Nieco Automatic Broiler is designed to automatically stop gas flow to the broiler in the event of power failure, gas pressure loss or any other related incident. No attempt to operate this appliance should be made in the event of a power failure. -
Page 14: Control Operation
Leave the broiler at 1000º F for 25 minutes. DO NOT COOK DURING THIS TIME. After the 25 minutes is up, use the arrows to put the set point to actual temperature. The bottom number is the set tem- perature and the top number is the actual temperature. Nieco Corporation - Model JF93G... -
Page 15: Normal Operation
Push the up or down button to YES or NO. When you are done making changes, press the center square button after you are done adjust- ing the burner to save your changes. Nieco Corporation - JF93G Dual Belt EMEA... - Page 16 (10 character limit). Press and hold the PRODUCT SELEC- TION BUTTON for 5 seconds to save the changes and return to normal operation. Nieco Corporation - JF93G Dual Belt EMEA...
-
Page 17: Assembly/Disassembly And Cleaning
The location of the part. When to clean the part. The tools needed to clean the part Picture of the part to be removed and cleaned. How to remove and clean the parts. Nieco Corporation - JF93G Dual Belt EMEA... - Page 18 Meat Guides Clean: Every 4 hours Feed End Tools Scrub Pad 3-Compartment Sink Instructions 1. Lift the meat guides up and off the feeder. 2. Wash, rinse, and sanitize in the 3-compartment sink. Nieco Corporation - JF93G Dual Belt EMEA...
- Page 19 3. Wash, rinse, and sanitize in the 3-compartment sink. DO NOT lift the feeder base by the feeder bar or the chains. This will damage the feeder base. REASSEMBLY: Pull the release pin and place feeder base in position. Nieco Corporation - JF93G Dual Belt EMEA...
- Page 20 Feeder Housing Clean: Daily Feed End Tools Scrub Pad 3-Compartment Sink Instructions 1. Lift and remove. 2. Wash, rinse, and sanitize in the 3-compartment sink. REASSEMBLY: Hang feeder housing on brackets. Nieco Corporation - JF93G Dual Belt EMEA...
- Page 21 Heat Resistant Degreaser 3-Compartment Sink Instructions 1. Slide warming pan shield out. 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in the 3-compartment sink. Nieco Corporation - JF93G Dual Belt EMEA...
- Page 22 Heat Resistant Degreaser 3-Compartment Sink Instructions 1. Slide crumb tray out. 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in the 3-compartment sink. Nieco Corporation - JF93G Dual Belt EMEA...
- Page 23 Discharge End Tools Scrub Pad Heat Resistant Degreaser 3-Compartment Sink Instructions 1. Lift up and off. 2. Take to sink area and spray with degreaser. 3. Wash, rinse, and sanitize in the 3-compartment sink. Nieco Corporation - JF93G Dual Belt EMEA...
- Page 24 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in the 3-compartment sink. REASSEMBLY: Hang stripper blade on brackets. Nieco Corporation - JF93G Dual Belt EMEA...
- Page 25 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in the 3-compartment sink. REASSEMBLY: Be sure grease trough is pushed all the way into the broiler. Nieco Corporation - JF93G Dual Belt EMEA...
- Page 26 RINSE WITH WATER ONLY. NEVER USE ANY CHEMICALS ON THE CATALYST. 3. Lay flat to drain water and let air dry overnight. CAUTION: Extremely Hot 4. Make sure Incendalyst™ is dry before putting back on broiler. Nieco Corporation - JF93G Dual Belt EMEA...
- Page 27 3. Wash with a scrub pad, rinse, and sanitize in CAUTION: Extremely Hot the 3-compartment sink. 4. When reinstalling note that Heat shield slopes upwards towards rear of broiler and legs are resting on rear airbox. Nieco Corporation - JF93G Dual Belt EMEA...
-
Page 28: Belt Adjustment
Tool to scrape deposits from the inner shield. BELT ADJUSTMENT As Needed Tools Instructions 1. Remove return slide and stripper blade. 2. Loosen slotted crossbar bracket. 3. Pry on shaft to adjust belt. 4. Tighten bolts. Nieco Corporation - JF93G Dual Belt EMEA... - Page 29 Be sure that both air box assemblies are installed and sit flush on their brackets. Main Burner Orifices Clean: Monthly Side Tools Small Orifice Brush Instructions 1. Use a small brush to clean the main burner orifices Nieco Corporation - JF93G Dual Belt EMEA...
- Page 30 2. Remove the ceramic boot from the back of the flame sensor. 3. Loosen the wing nut holding the flame sensor in place. 4. Remove the flame sensor and clean the metal tip with a DRY, clean scrub pad. Nieco Corporation - JF93G Dual Belt EMEA...
-
Page 31: Troubleshooting Guide
CooKInG PRobleMs Burgers under or over cooked. Adjust conveyor belt speed. Clean burners and orifices. Excessive flaming in broiler. Clean the catalyst if equipped. Check the hood for proper operation. Check product for overcooking. Nieco Corporation - JF93G Dual Belt EMEA... -
Page 32: Parts Location Drawings
PaRTs loCaTIon DRaWInGs Manifold Nieco Corporation - JF93G Dual Belt EMEA... - Page 33 PaRTs loCaTIon DRaWInGs orifice nG Nieco Corporation - JF93G Dual Belt EMEA...
- Page 34 PaRTs loCaTIon DRaWInGs feeder assembly Nieco Corporation - JF93G Dual Belt EMEA...
- Page 35 PaRTs loCaTIon DRaWInGs Clutch assembly Nieco Corporation - JF93G Dual Belt EMEA...
-
Page 36: Wiring Diagrams
G. WIRInG DIaGRaMs 230V Wiring H i gh Pr essur e B l ow er M ot or R ever se Sw i t ch P/ N 18447 P/ N 13579 Nieco Corporation - JF93G Dual Belt EMEA... - Page 37 G. WIRInG DIaGRaMs 230V Wiring H i gh Pr essur e B l ow er P/ N 18447 Nieco Corporation - JF93G Dual Belt EMEA...
- Page 38 This page intentionally left blank. Nieco Corporation - Model JF94G CE...
-
Page 39: Specifications
CaUTIon Do not operate the broiler at gas pressures other than those stated here. Doing so will affect the opera- tion of your broiler. Nieco Corporation - JF93G Dual Belt EMEA... - Page 40 Revision History: Date Notes 10-20-2015 Released nieco Corporation 7950 Cameron Drive Windsor, CA 95492 (707) 284-7100 Office • (707) 284-7430 Fax www.nieco.com • e-mail: service@nieco.com Printed in the USA © 2012 Nieco Corporation All Rights Reserved P/N 99002...
Need help?
Do you have a question about the BroilVection JF93 and is the answer not in the manual?
Questions and answers