Nieco BroilVection JF64-3 Gas LYFE Owner's Manual
  1. Manuals
  2. Brands
  3. Nieco Manuals
  4. Broiler
  5. BroilVection JF64-3 Gas LYFE
  6. Owner's manual

Nieco BroilVection JF64-3 Gas LYFE Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BroilVection
Model JF64-3 Gas LYFE
Owner's Manual
A P P R OVA L S :
F O R Y O U R S A F E T Y :
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other
appliance.
W A R N I N G :
Improper installation, adjustment, alteration, maintenance can cause property damage, injury, or death.
Read the installation, operating and maintenance instructions thoroughly before installing or servicing
this equipment.
Broiler area must be kept free of combustible materials, and the flow of combustion and ventilation air
must not be obstructed. Operating personnel must not perform any maintenance or repair
functions. Contact your Nieco Authorized Dealer.
IMPORTANT: RETAIN THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE
™

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BroilVection JF64-3 Gas LYFE and is the answer not in the manual?

Questions and answers

Related Manuals for Nieco BroilVection JF64-3 Gas LYFE

Summary of Contents for Nieco BroilVection JF64-3 Gas LYFE

  • Page 1 Broiler area must be kept free of combustible materials, and the flow of combustion and ventilation air must not be obstructed. Operating personnel must not perform any maintenance or repair functions. Contact your Nieco Authorized Dealer. IMPORTANT: RETAIN THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE...

  • Page 2: Table Of Contents

    I. specifications ..........32 Nieco Corporation - Model JF64-3G...

  • Page 3: General Information

    This manual provides the safety, installation and operating procedures for the Nieco Automatic Broiler Model JF64-3G. We recommend that all information contained in this manual be read prior to installing and operating the broiler.

  • Page 4: Service/Technical Assistance

    Authorized Nieco Distributors and Service Agencies will void the warranty and may significantly alter the performance of your broiler. The use of non-Nieco parts is capable of affecting these criteria, and may affect broiler performance, parts longevity and food safety. Your local Authorized Nieco Distributor and Service Agent has been factory trained and has a complete supply of parts for your Nieco Automatic Broiler.
  • Page 5 Distributor for adjustment or repair. • Use only genuine Nieco replacement parts for your broiler. Failure to do so will void the warranty and may significantly alter the performance of your broiler. The use of non-Nieco parts is capable of affecting these criteria, and may affect broiler performance, parts longevity and food safety.

  • Page 6: Machine Installation

    12” (305 mm) 0” (0 mm) 0” (0 mm) Sides of broiler 12” (305 mm) 0” (0 mm) 0” (0 mm) Front of broiler 12” (305 mm) 0” (0 mm) 24” (610 mm) (Feed end) Nieco Corporation - Model JF64-3G...

  • Page 7: Gas Connection

    For easy movement of the appliance, the connector should be installed with a "lazy" loop for minimum tension. note: Gas appliances should be disconnected prior to maximum movement. (Minimal movement is possible to connect hose.) Nieco Corporation - Model JF64-3G...

  • Page 8: Restraining Device

    Disconnect power before servicing. b.10 Pre-operation Check Be sure that all parts are installed in the proper location: Ventilation is turned on Broiler is plugged in Gas line is connected Nieco Corporation - Model JF64-3G...

  • Page 9: Operation

    1. Belt reverse buttons. Pres and hold these buttons to reverse the direction of the belt to help free a belt jam. 2. Shaft cleaning tool. Use this tool on the drive and idler shafts to scrape them clean. Nieco Corporation - Model JF64-3G...

  • Page 10: Step-By-Step Lighting Procedure

    If this still doesn’t light the broiler, see the MANUAL IGNITION instructions. 1. Turn the MaIn PoWeR sWITCH on. 2. Allow broiler to heat for 45 minutes before cooking. Nieco Corporation - Model JF64-3G...

  • Page 11: Shutdown Procedure

    Your Nieco Automatic Broiler is designed to automatically stop gas flow to the broiler in the event of power failure, gas pressure loss or any other related incident. No attempt to operate this appliance should be made in the event of a power failure.

  • Page 12: Control Operation

    Leave the broiler at 1000º F for 25 minutes. DO NOT COOK DURING THIS HOUR. After the 25 minutes is up, use the arrows to put the set point to actual temperature. The bottom number is the set tempera- ture and the top number is the actual temperature. Nieco Corporation - Model JF93G...

  • Page 13: Assembly/Disassembly And Cleaning

    W a s h , r i n s e , a n d s a n i t i z e i n t h e 3 -compartment s i n k . Nieco Corporation - Model JF64-3G...
  • Page 14 Front Heat Shield Clean: Daily Feed End Tools Scrub Pad 3-Compartment Sink Instructions 1. Lift the Front Heat Shield up and off the unit. 2. Wash, rinse, and sanitize in the 3-compartment sink. Nieco Corporation - Model JF64-3G...
  • Page 15 Feed End Tools Scrub Pad Degreaser 3-Compartment Sink Instructions 1. Slide lower pan out. 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in the 3-compartment sink. Nieco Corporation - Model JF64-3G...
  • Page 16 Feed End Tools Scrub Pad Degreaser 3-Compartment Sink Instructions 1. Slide Drip Tray out. 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in the 3-compartment sink. Nieco Corporation - Model JF64-3G...
  • Page 17 Discharge Awning Clean: Daily Discharge End Tools Scrub Pad Degreaser 3-Compartment Sink Instructions 1. Lift up and off. 2. Take to sink area and spray with degreaser. 3. Wash, rinse, and sanitize in the 3-compartment sink. Nieco Corporation - Model JF64-3G...
  • Page 18 Make sure stripper blade is cool before putting in water or it may warp. 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in the 3-compartment sink. REASSEMBLY: Hang stripper blade on brackets. Nieco Corporation - Model JF64-3G...
  • Page 19 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in the 3-compartment sink. REASSEMBLY: Be sure grease trough is pushed all the way into the broiler. Nieco Corporation - Model JF64-3G...
  • Page 20 2. SOAK IN WARM WATER FOR 1 HOUR. RINSE WITH WATER ONLY. NEVER USE ANY CHEMICALS ON THE  CATALYST. 3. Lay flat to drain water and let air dry overnight. CAUTION: Extremely Hot 4. Make sure Incendalyst™ is dry before putting back on broiler. Nieco Corporation - Model JF64-3G...
  • Page 21 EXTREMELY HOT! Be careful not to burn yourself. 1. Lift upper heat shield up and off. 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in CAUTION: Extremely Hot the 3-compartment sink. Nieco Corporation - Model JF64-3G...
  • Page 22 2. Remove the ceramic boot from the back of the flame sensor. 3. Loosen the wing nut holding the flame sensor in place. 4. Remove the flame sensor and clean the metal tip with a DRY, clean scrub pad. Nieco Corporation - Model JF64-3G...
  • Page 23 Be sure that both air box assemblies are installed and sit flush on their brackets. Main Burner Orifices Clean: Daily Side Tools Small Orifice Brush Instructions 1. Use a small brush to clean the main burner orifices Nieco Corporation - Model JF64-3G...
  • Page 24 Tool to scrape deposits from the inner shield. BELT ADJUSTMENT As Needed Tools Instructions 1. Remove Discharge Awning and stripper blade. 2. Loosen slotted crossbar bracket. 3. Pry on shaft to adjust belt. 4. Tighten bolts. Nieco Corporation - Model JF64-3G...

  • Page 25: Troubleshooting Guide

    Check cookout temperature (undercooking). CooKInG PRobleMs Adjust conveyor belt speed. Burgers under or over cooked. Clean burners and orifices. Clean the catalyst if equipped. Excessive flaming in broiler. Check the hood for proper operation. Check product for overcooking. Nieco Corporation - Model JF64-3G...

  • Page 26: Parts Location Drawings

    PaRTs loCaTIon DRaWInGs Discharge end View HEAT SHIELD 22718 GREASE PAN, FEEDER EXT. 23451 GREASE PAN, LOWER 23450 HEAT SHIELD 22942 TRAY, GREASE DRIP 23460 Nieco Corporation - Model JF64-3G...
  • Page 27 PaRTs loCaTIon DRaWInGs feed end View Nieco Corporation - Model JF64-3G...

  • Page 28: Parts Replacement List

    SENSOR, FLAME, SLOTTED 18861 THERMOCOUPLE PROBE 1.88 TYPE J 10291 IGNITOR HOT SURFACE, 24V 2049-A REGULATOR 3/4 12741 SOLENOID VALVE 24 VAC, 1/4 COMP. FIT 19054 SOLENOID VALVE, 1/2 NPT, 24 VAC 21316 VALVE MODULATING, 24V,1/2 Nieco Corporation - Model JF64-3G...
  • Page 29 HEAT SHIELD, HOLDING PAN, 16307 TRAY, SLUDGE, GREASE 23460 TRAY, GREASE DRIP 9452 GREASE BOX 12"X10"X4" 22718 HEAT SHIELD, FRONT 22898 GREASE BOX SIDE 23364 STRIPPER BLADE 23840 PAN, PATTY CATCH 23456 AWNING, FLOW THROUGH Nieco Corporation - Model JF64-3G...
  • Page 30 19076 CONROL,MODULATING VALVE,24V 10291 IGNITOR HOT SURFACE, 24V 12725 BRIDGE RECTIFIER 17185 SENSOR, FLAME, SLOTTED 16921 CONTROL, IGNITION, 24V 18861 THERMOCOUPLE PROBE 1.88 TYPE J 48 13727-B MOTOR CONTROL 18447 BLOWER, HIGH PRESSURE, 24VDC, 2 Nieco Corporation - Model JF64-3G...

  • Page 31: Wiring Diagrams

    H. WIRInG DIaGRaMs 115V Wiring H i gh Pr essur e B l ow er M ot or R ever se Sw i t ch P/ N 18447 P/ N 13579 Nieco Corporation - Model JF64-3G...

  • Page 32: Specifications

    5-29-2015 General Updates nieco Corporation 7950 Cameron Drive Windsor, CA 95492 (707) 284-7100 Office • (707) 284-7430 Fax www.nieco.com • e-mail: service@nieco.com Printed in the USA © 2012 Nieco Corporation All Rights Reserved P/N 99002 Nieco Corporation - Model JF64-3G...

This manual is also suitable for:

Broilvection jf64-3gBroilvection jf64-3

Table of Contents