Nieco BroilVection JF64-2 Gas Owner's Manual
  1. Manuals
  2. Brands
  3. Nieco Manuals
  4. Broiler
  5. BroilVection JF64-2 Gas
  6. Owner's manual

Nieco BroilVection JF64-2 Gas Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
BroilVection
Model JF64-2 Gas
Owner's Manual
A P P R OVA L S :
F O R Y O U R S A F E T Y :
Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other
appliance.
W A R N I N G :
Improper installation, adjustment, alteration, maintenance can cause property damage, injury, or death.
Read the installation, operating and maintenance instructions thoroughly before installing or servicing
this equipment.
Broiler area must be kept free of combustible materials, and the flow of combustion and ventilation air
must not be obstructed. Operating personnel must not perform any maintenance or repair
functions. Contact your Nieco Authorized Dealer.
IMPORTANT: RETAIN THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE
™

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BroilVection JF64-2 Gas and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Nieco BroilVection JF64-2 Gas

Summary of Contents for Nieco BroilVection JF64-2 Gas

  • Page 1 Broiler area must be kept free of combustible materials, and the flow of combustion and ventilation air must not be obstructed. Operating personnel must not perform any maintenance or repair functions. Contact your Nieco Authorized Dealer. IMPORTANT: RETAIN THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE...

  • Page 2: Table Of Contents

    I. specifications ..........43 Nieco Corporation - Model JF64-2G...

  • Page 3: General Information

    This manual provides the safety, installation and operating procedures for the Nieco Automatic Broiler Model JF64. We recommend that all information contained in this manual be read prior to installing and operating the broiler.

  • Page 4: Service/Technical Assistance

    Authorized Nieco Distributors and Service Agencies will void the warranty and may significantly alter the performance of your broiler. The use of non-Nieco parts is capable of affecting these criteria, and may affect broiler performance, parts longevity and food safety. Your local Authorized Nieco Distributor and Service Agent has been factory trained and has a complete supply of parts for your Nieco Automatic Broiler.
  • Page 5 Distributor for adjustment or repair. • Use only genuine Nieco replacement parts for your broiler. Failure to do so will void the warranty and may significantly alter the performance of your broiler. The use of non-Nieco parts is capable of affecting these criteria, and may affect broiler performance, parts longevity and food safety.

  • Page 6: Machine Installation

    12” (305 mm) 0” (0 mm) 0” (0 mm) Sides of broiler 12” (305 mm) 0” (0 mm) 0” (0 mm) Front of broiler 12” (305 mm) 0” (0 mm) 24” (610 mm) (Feed end) Nieco Corporation - Model JF64-2G...

  • Page 7: Gas Connection

    For easy movement of the appliance, the connector should be installed with a "lazy" loop for minimum tension. note: Gas appliances should be disconnected prior to maximum movement. (Minimal movement is possible to connect hose.) Nieco Corporation - Model JF64-2G...

  • Page 8: Restraining Device

    Disconnect power before servicing. b.10 Pre-operation Check Be sure that all parts are installed in the proper location: Ventilation is turned on Broiler is plugged in Gas line is connected Nieco Corporation - Model JF64-2G...

  • Page 9: Operation

    4. Ignition failure light. This light will flash if the broiler burners fail to ignite. Cycle the on/off switch to reset. Check the troubleshooting guide if the broiler fails to light. Nieco Corporation - Model JF64-2G...
  • Page 10 3. ADJUSTMENT BUTTONS - Use to adjust product cook times, element settings and product names. 4. SELECTION INDICATOR LIGHT - Lights up to show which button is selected. Multi-speed control P/N 15161-B Nieco Corporation - Model JF64-2G...

  • Page 11: Step-By-Step Lighting Procedure

    If this still doesn’t light the broiler, see the MANUAL IGNITION instructions. 1. Turn the MaIn PoWeR sWITCH on. 2. Allow broiler to heat for 45 minutes before cooking. Nieco Corporation - Model JF64-2G...

  • Page 12: Shutdown Procedure

    Your Nieco Automatic Broiler is designed to automatically stop gas flow to the broiler in the event of power failure, gas pressure loss or any other related incident. No attempt to operate this appliance should be made in the event of a power failure.

  • Page 13: Control Operation

    Leave the broiler at 1000º F for 25 minutes. DO NOT COOK DURING THIS TIME. After the 25 minutes is up, use the arrows to put the set point to the actual temperature. The bottom number is the set temperature and the top number is the actual temperature. Nieco Corporation - Model JF64-2G...
  • Page 14 (10 character limit). Press and hold the PRODUCT SELEC- TION BUTTON for 5 seconds to save the changes and return to normal operation. Nieco Corporation - Model JF64-2G...

  • Page 15: Assembly/Disassembly And Cleaning

    W a s h , r i n s e , a n d s a n i t i z e i n t h e 3 -compartment s i n k . Nieco Corporation - Model JF64-2G...
  • Page 16 Meat Guides Clean: Every 4 hours Feed End Tools Scrub 3-Compartment Sink Instructions 1. Lift the meat guides up and off the feeder. 2. Wash, rinse, and sanitize in the 3-compartment sink. Nieco Corporation - Model JF64-2G...
  • Page 17 3. Wash, rinse, and sanitize in the 3-compartment sink. DO NOT lift the feeder base by the feeder bar or the chains. This will damage the feeder base. REASSEMBLY: Pull the release pin and place feeder base in position. Nieco Corporation - Model JF64-2G...
  • Page 18 REASSEMBLY: Pull the release pin and place feeder base in position. Feeder Housing Clean: Daily Feed End Tools Scrub 3-Compartment Sink Instructions 1. Lift and remove. 2. Wash, rinse, and sanitize in the 3-compartment sink. REASSEMBLY: Hang feeder housing on brackets. Nieco Corporation - Model JF64-2G...
  • Page 19 Scrub Pad Heat Resistant Degreaser 3-Compartment Sink Instructions 1. Slide warming pan shield out. 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in the 3-compartment sink. Nieco Corporation - Model JF64-2G...
  • Page 20 Scrub Pad Heat Resistant Degreaser 3-Compartment Sink Instructions 1. Slide crumb tray out. 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in the 3-compartment sink. Nieco Corporation - Model JF64-2G...
  • Page 21 Clean: Daily Discharge End Tools Scrub Pad Heat Resistant Degreaser 3-Compartment Sink Instructions 1. Lift up and off. 2. Take to sink area and spray with degreaser. 3. Wash, rinse, and sanitize in the 3-compartment sink. Nieco Corporation - Model JF64-2G...
  • Page 22 Make sure stripper blade is cool before putting in water or it may warp. 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in the 3-compartment sink. REASSEMBLY: Hang stripper blade on brackets. Nieco Corporation - Model JF64-2G...
  • Page 23 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in the 3-compartment sink. REASSEMBLY: Be sure grease trough is pushed all the way into the broiler. Nieco Corporation - Model JF64-2G...
  • Page 24 2. SOAK IN WARM WATER FOR 1 HOUR. RINSE WITH WATER ONLY. NEVER USE ANY CHEMICALS ON THE  CATALYST. 3. Lay flat to drain water and let air dry overnight. CAUTION: Extremely Hot 4. Make sure Incendalyst™ is dry before putting back on broiler. Nieco Corporation - Model JF64-2G...
  • Page 25 ReaR yourself. 1. Lift upper heat shield up and off. 2. Take to sink area and spray with degreaser. 3. Wash with a scrub pad, rinse, and sanitize in CAUTION: Extremely Hot the 3-compartment sink. Nieco Corporation - Model JF64-2G...
  • Page 26 2. Remove the ceramic boot from the back of the flame sensor. 3. Loosen the wing nut holding the flame sensor in place. 4. Remove the flame sensor and clean the metal tip with a DRY, clean scrub pad. Nieco Corporation - Model JF64-2G...
  • Page 27 Be sure that both air box assemblies are installed and sit flush on their brackets. Main Burner Orifices Clean: Monthly Side Tools Small Orifice Brush Instructions 1. Use a small brush to clean the main burner orifices Nieco Corporation - Model JF64-2G...
  • Page 28 Tool to scrape deposits from the inner shield. BELT ADJUSTMENT As Needed Tools Instructions 1. Remove return slide and stripper blade. 2. Loosen slotted crossbar bracket. 3. Pry on shaft to adjust belt. 4. Tighten bolts. Nieco Corporation - Model JF64-2G...

  • Page 29: Troubleshooting Guide

    Check cookout temperature (undercooking). CooKInG PRobleMs Burgers under or over cooked. Adjust conveyor belt speed. Clean burners and orifices. Excessive flaming in broiler. Clean the catalyst if equipped. Check the hood for proper operation. Check product for overcooking. Nieco Corporation - Model JF64-2G...

  • Page 30: Parts Location Drawings

    PaRTs loCaTIon DRaWInGs Discharge end View INCENDALYST 23161 HOOD 24312 REFLECTOR 25322 FRONT AIRBOX 24750 AIRBOX/BURNER REAR 24752 Nieco Corporation - Model JF64-2G...
  • Page 31 GUIDE 1/2” AND 3/4” 18556 FEEDER COVER 17066 DRIVE L. 22348 DRIVE R. 22354 ENCLOSURE, DUAL 13” 22295 SLUDGE TRAY 16307 GREASE PAN 24305 SHIELD, HOLDING PAN 22942 BURNER DOUBLE 22739 HOLDING PAN FRAME 25325 DRIP TRAY 22721 Nieco Corporation - Model JF64-2G...
  • Page 32 PaRTs loCaTIon DRaWInGs feeder assembly Nieco Corporation - Model JF64-2G...
  • Page 33 PaRTs loCaTIon DRaWInGs Clutch assembly Nieco Corporation - Model JF64-2G...

  • Page 34: Parts Replacement List

    REGULATOR, RV48, 1/2" 21316 VALVE, ؽ, MODULATING, 24V 19054 SOLENOID VALVE, 1/2 NPT, 24VAC 16921 IGNITION MODULE 17201 IGNITION FAILURE LIGHT 12741 SOLENOID VALVE - 24V - PILOT SHUTOFF 20786 GEAR MOTOR,DC,BRUSHLESS,REVERSE SHAFT 18168 MOTOR CONTROL CABLE Nieco Corporation - Model JF64-2G...
  • Page 35 END COVER - MAIN POWER 4405-31 FUSE HOLDER - TERMINAL BLOCK 4405-30 END SECTION - GRAY - FUSE HOLDER 4621-02 FUSE 2A 4621-0025 FUSE .25A 18686 TERMINAL BLOCK-GRAY 18688 TERMINAL BLOCK - GROUND 18687 END COVER - TEMINAL BLOCK Nieco Corporation - Model JF64-2G...
  • Page 36 BLACK KNOB - CLUTCH ASSEMBLY 20975 FEEDER MOUNTING BRACKET - LH 20976 FEEDER MOUNTING BRACKET - RH 20503 BRACKET, CLUTCH MOUNTING MIsCellaneoUs 23307 CLEANING BRUSH 9133 ROD BELT PLIERS 9134 #35 CHAIN BREAKER TOOL 12744 GAS LINE 3/4 Nieco Corporation - Model JF64-2G...

  • Page 37: Wiring Diagrams

    H. WIRInG DIaGRaMs 220V Wiring H i gh Pr essur e B l ow er M ot or R ever se Sw i t ch P/ N 18447 P/ N 13579 Nieco Corporation - Model JF64-2G...
  • Page 38 H. WIRInG DIaGRaMs 220V Wiring Nieco Corporation - Model JF64-2G...
  • Page 39 H. WIRInG DIaGRaMs 115V Wiring H i gh Pr essur e B l ow er M ot or R ever se Sw i t ch P/ N 18447 P/ N 13579 Nieco Corporation - Model JF64-2G...
  • Page 40 H. WIRInG DIaGRaMs 115V Wiring Nieco Corporation - Model JF64-2G...
  • Page 41 This page intentionally left blank. Nieco Corporation - Model JF64-2G...
  • Page 42 This page intentionally left blank. Nieco Corporation - Model JF64-2G...

  • Page 43: Specifications

    CaUTIon Do not operate the broiler at gas pressures other than those stated here. Doing so will affect the opera- tion of your broiler. Nieco Corporation - Model JF64-2G...
  • Page 44 Revision History: Date Notes 7-2-2014 Released 5-4-2015 General Updates nieco Corporation 7950 Cameron Drive Windsor, CA 95492 (707) 284-7100 Office • (707) 284-7430 Fax www.nieco.com • e-mail: service@nieco.com Printed in the USA © 2012 Nieco Corporation All Rights Reserved P/N 99002...

This manual is also suitable for:

Broilvection jf64-2g

Table of Contents