Table of Contents
Advertisement
Using the Drawbar Organ Mode
To save an edited drawbar
organ tone
1.
After editing parameters, use the [
CURSOR buttons to display "More?".
2.
Press the [
] CURSOR button three times to
display the screen for inputting a tone name and
assigning a tone number.
3.
Use the [+] and [–] buttons to select a tone number.
• You can select a tone number in the range of 100 to 199.
4.
After the tone name is the way you want, press the
[
] CURSOR button to store the tone.
• Use the [+] and [–] buttons to scroll through letters at
the current cursor location.
• Use the [
] and [
cursor left and right.
• See the page E-45 for information about inputting text.
5.
After everything is the way you want, press the
[
] CURSOR button to store the tone.
• This will display a confirmation message asking
whether you really want to save the data. Press the
YES button to save the data.
• After the save operation is complete, the message
"Complete" appears and then the display returns to
the tone selection screen.
• To cancel save, press the EXIT button.
E-22
] and [
] CURSOR buttons to move the
]
707A-E-024A
Advertisement
Table of Contents
