Table of Contents
Advertisement
Setup Names
You can assign setups into one of 32 areas, which you can
select using BANK buttons 1 through 4 and the four
REGISTRATION buttons. Area names range from 1-1
through 8-4 as shown below.
1
Use the BANK button to select the bank. Each press of
BANK cycles through the bank numbers from 1 to 8.
2
Pressing one of the REGISTRATION buttons (1 to 4)
selects the corresponding area in the currently selected
bank.
• Whenever you save a setup and assign it a setup name, any
setup data previously assigned to that name is replaced with
the new data.
• You can use the keyboard's MIDI capabilities to save your
setup data to a computer or other external storage device.
See "Using the Music Data Management Software (on the
Bundled CD-ROM)" on page E-76 for details.
707A-E-049A
Registration Memory
To Save a Setup in Registration
Memory
1.
Select a tone and rhythm, and otherwise set up the
keyboard the way you want it.
• See "Registration Memory Features" on page E-46 for
details on what data is stored in the registration
memory.
2.
Use the BANK button or the number buttons to
select the bank you want.
• If you do not perform any operation for about five
seconds after pressing the BANK button, the display
returns to the contents in step 1, above.
• Bank 1 selected.
B
a
3.
While holding down the STORE button, press a
REGISTRATION button (1 to 4).
• The following display appears when you press the 2
button.
S
o t
4.
Release the STORE and REGISTRATION
buttons.
• The setup is saved as soon as you press a REGISTRATION
button in step 3, above.
k n
r e
E-47
Advertisement
Table of Contents
