Canon Laser Shot LBP3300 User Manual page 329

7
6
8
9
10
6-24 Network Board
Attach the ferrite core to the LAN cable as shown in the figure.
Attach the ferrite core at 5 cm or less from the end of the connector which is
connected to the printer.
NOTE
This network board does not come with a LAN cable. A Category 5 twisted pair
cable is required for installing the network board and connecting the printer to a
network. Have cables or a hub ready as needed.
Connect the LAN cable.
Connect a LAN cable that is compatible with the LAN connector of the network
board according to the network.
Connect the power cord.
Plug the power plug into the AC power outlet.
5 cm or less