15
3
16
The installation of the printer driver is completed.
For Windows XP/Server 2003
IMPORTANT
When printing a test page, make sure that the printer is properly connected to the
computer and the printer is ON before installing the CAPT software.
1
2
3-46
Installing the CAPT Software
Click [Finish].
Copying files is started.
When printing a test page, a dialog box will appear after printing. Click [OK] to
close the dialog box.
NOTE
If the [Digital Signature Not Found] dialog box appears, click [Yes].
If the printer and computer are not connected, turn the
computer off, connect the computer and printer with a USB
cable, and then turn them ON.
Turn the computer on and start up Windows XP/Server 2003.
Log on as a member of Administrators.
IMPORTANT
If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then
install the CAPT software using this procedure.