Canon Laser Shot LBP3300 User Manual page 328

IMPORTANT
The removed protective plate and screws are required when the network board is
removed. Keep them where they will not get lost.
5
Insert the network board into the expansion slot.
Hold the metal panel portions of the network board and insert the board while
aligning it with the guide rails inside the expansion slot.
IMPORTANT
•
Do not touch the network board parts, printed wire, or connectors with your hands.
•
Insert the printer connector of the network board securely into the connector inside
the expansion slot.
6
Secure the top and bottom portions of the network board with
the two screws supplied with the network board.
Network Board 6-23
6