Check Image With Print Area Layout 2 - Canon imagePROGRAF W6400 Manual

Print Plug-In for Photoshop
When the cursor on the preview is displayed as
Note
specify the print position by dragging the image. When the cursor is
displayed as
have all been met.
• There is no checkmark in Borderless Printing (Borderless Printing is
only available with W8400PG and W6400PG).
• There is no checkmark in Enlarged/Reduced Printing, or Scaling has
been selected.
• Center of Roll Paper has not been selected in Layout (Center of Roll
Paper is available only with W8400PG and W6400PG).

Check Image with Print Area Layout 2

In Print Area Layout 2 the layout is matches the Media Size you have set, and both the valid
print range and the area outside of that range are displayed.
Select Print Area Layout 2 in Preview.
When the cursor on the preview is displayed as
Note
specify the print position by dragging the image. When the cursor is
displayed as
have all been met.
• There is no checkmark in Borderless Printing (Borderless Printing is
only available with W8400PG and W6400PG).
• There is no checkmark in Enlarged/Reduced Printing, or Scaling has
been selected.
• Center of Roll Paper has not been selected in Layout (Center of Roll
Paper is available only with W8400PG and W6400PG).
Chapter 3 Utilize Print Plug-In to Print
on the preview, the below conditions on the Main sheet
on the preview, the below conditions on the Main sheet
on the preview, you can
on the preview, you can
3-2