Canon imagePROGRAF W6400 Manual page 21

Print Plug-In for Photoshop
Setting
Fit Roll Paper Width
(displayed only with W8400PG and
W6400PG)
Scaling
This is not displayed when a checkmark is placed in Borderless Printing.
Note
4 Media Size
You can select the size of the print media.
• The media sizes you can select differ with printers.
Note
• This is not displayed when a checkmark is placed in Borderless Printing.
• This is not displayed when Fit Roll Paper Width is set in Enlarged/
Reduced Printing.
• The details of Media Size you have set is saved even when you close
Print Plug-In.
5 Orientation
This selects the print orientation.
The following settings are available for orientation.
Setting
Portrait
Landscape
6 Layout
You can select the print position of an image on the media.
The following settings are available for layout.
Setting
Top Left
Center of Output Media
Size
Specify Print Start
Position
Center of Roll Paper
Width
(displayed only with
W8400PG and
W6400PG)
Chapter 2 Functions of Print Plug-In
Details
This automatically enlarges/reduces the entire
image imported to Print Plug-In to match the width
of the roll paper with the width of the image when
printing.
• This is not displayed if Cut Sheet is selected in
Media Source.
This enlarges/reduces the entire image by the
specified scaling value.Input the scaling value in
numerical characters. You can specify a range
between 20-600%.
• You can change the numbers by clicking either
or
Details
Prints the image on the media as it appears on the screen.
Prints the image on the media rotated 90 degrees.
Details
This prints the image to fit the top left of the effective print
area for Media Size.
This prints the center of the image on the center of the
selected Media Size.
You can print after specifying the print field top margin start
position and the left margin start position in From Top
Margin and From Left Margin for Media Size.
From Input the margin from the top of the media in
Top numbers.
• You can input between -9999 and 9999 mm.
Margin
From Input the margin from the left of the media in
Left numbers.
• You can input between -9999 and 9999 mm.
Margin
This prints the center of the image on the center of the
selected roll paper.
• This is not displayed if Cut Sheet is selected in Media
Source.
.
2-9