Color Settings Sheet - Canon imagePROGRAF W6400 Manual

Print Plug-In for Photoshop
Setting
Automatic
Cutting
No Spaces at Top or
Bottom (Conserve Paper)
9 Defaults Button
Click this button to return all of the settings on the Page Setup sheet to their defaults.

Color Settings Sheet

You can use this sheet to adjust image Color, Brightness, Contrast, and Saturation, and you can
set the color balance of print product more to your liking.
1 Cyan, Magenta, Yellow
You can adjust the strength or weakness of a color by either inputting a numerical value or
dragging the slide bar.
• You can check the adjustments in the preview display.
Note
• The values of Cyan, Magenta and Yelow you have set is saved even after
closing Print Plug-In.
2 Brightness
You can adjust the brightness of the printed image without losing the brightest and darkest
areas by either inputting a numerical value or dragging the slide bar.
• You can check the adjustments in the preview display.
Note
• The values of Brightness you have set is saved even after closing Print
Plug-In.
Chapter 2 Functions of Print Plug-In
Details
Available When printing is complete, the roll media is automatically
cut.
None When printing is complete, the roll media is not
automatically cut and should be cut by hand.
Print Cut When printing is complete, the roll media is not
Guideline automatically cut. Print cut line is printed for cutting by
manual.
When you place a checkmark here, the print data is
printed without margins.
1
2
3
4
5
6
2-11