Canon imagePROGRAF W6400 Manual page 11

Print Plug-In for Photoshop
The imagePROGRAF Print Plug-In for Photoshop window (known below as the Plug-In
window) is displayed.
• If the message below is displayed but the Print Plug-In window is not
Note
displayed, install the newest imagePROGRAF printer driver and then
attempt step 3.
Version 2.41 or later of the W6400PG GARO printer driver must be
installed. Install the latest driver.
(The W6400PG portion of the above message will reflect your printer
name.)
• If the following message is displayed, but the Print Plug-In window is not
displayed, use Print Plug-In with Mac OS 9.1 or higher.
You cannot use this plug-in in this environment. This plug-in requires
Mac OS 9.1 or higher.
• If the following message is displayed, but the Print Plug-In window is not
displayed, open only one Photoshop.
Cannot start plug-in when Photoshop is open multiple times.
• If the message below is displayed but the Print Plug-In window is not
displayed, convert the image to RGB and then attempt step 3.
Set the image color space to RGB color.
Chapter 1 Installing Print Plug-In
1-7