For the ATR series camera, the
of the camera performance
Read noise is the most important reference to measure the performance of a camera. Lower read noise usually means better
SNR and better quality of image.
It is impressive that ATR533C comes with
Low Noise Mode
selecting
(Low Noise
Mode).
Gain Value
is in xxx% mode. Here xxx is used as the x axis
() = 20 ∗
( ) = 100 × 10
Low Noise
while the frame rate is reduced as sacrifice. Its significantly low read noise is: 0.34 to 1.9e-
ATR533C(ATR3CMOS09000KPA) User Manual
[( )/100]
10
( ()/20
Mode, which means users could get even lower readout noise by
5
Value) for the description
(Gain
Need help?
Do you have a question about the ATR533C and is the answer not in the manual?