Recording; Recording Movies On A Tape - Canon MV690 Instruction Manual

Recording Movies on a Tape

Before You Begin Recording
Make a test recording first to check if the camcorder operates correctly. Before you
make important recordings, clean the video heads (

Recording

1. Remove the lens cap.
2. Set the camcorder to CAMERA
mode.
•
to CAMERA and the TAPE/CARD switch
to b.
•
switch to CAMERA.
3. Push the OPEN button at the LCD
panel and open the LCD panel.
4. Press the start/stop button to begin
recording.
Press the start/stop button again to pause
recording.
When You Have Finished Recording
1. Turn the POWER switch to OFF.
2. Close the LCD panel and return the viewfinder into its initial position.
3. Replace the lens cap.
4. Unload the cassette.
5. Disconnect the power source.
22
Set the POWER switch
Set the POWER
135).
q
w
r
e