Canon MV690 Instruction Manual page 87

6. Connected device: Play back the tape.
7. Press the PAUSE a button on the wireless controller
when the scene you wish to insert appears.
8. Press the STOP 3 button on the wireless controller
to stop inserting.
Press the PAUSE a button on the wireless controller to pause
inserting.
9. Connected device: Stop playback.
❍ You cannot insert from a TV program when the synchronised signals are
distorted.
Connected device:
❍ AV insert may not work correctly if the tape has a blank section or changes in
the recording mode.
❍ AV insert cannot be performed when the quality of the recording is poor, or
during special playback such as fast forward, rewind, playback pause, slow
playback etc.
Set the zero set memory at the end of the scene you wish to replace. The
camcorder will automatically stop AV insert at that point.
ZERO SET
REW PLAY FF
MEMORY
12bit
STOP
AUDIO OUT
E
AUDIO DUB. PAUSE SLOW 2
AV INSERT AV DV REMOTE SET
ZERO SET
REW PLAY FF
MEMORY
12bit
STOP
AUDIO OUT
AUDIO DUB. PAUSE SLOW 2
AV INSERT AV DV REMOTE SET
87