Direct Print Related Messages - Canon MV690 Instruction Manual

Direct Print Related Messages

Message
PAPER ERROR
NO PAPER
PAPER JAM
PAPER HAS BEEN
CHANGED
MEDIA TYPE ERROR
INK ERROR
NO INK
LOW INK LEVEL
WASTE TANK FULL
FILE ERROR
CANNOT PRINT!
COULD NOT PRINT X
IMAGES
SET PRINT ORDER
PRINTER ERROR
HARDWARE ERROR
COMMUNICATION
ERROR
PRINTER IN USE
PRINTER WARMING
UP
PAPER LEVER ERROR
PRINTER COVER OPEN
NO PRINTHEAD
There is a problem with the paper.
Wrong paper size is inserted, or the ink cannot be used with
the selected paper.
Paper is not correctly inserted or there is no paper.
The paper jammed during printing.
Paper size has been changed between print setting and start
of printing.
You attempted to use a paper size/type that is not
supported by the printer.
There is a problem with the ink.
The ink cartridge is not inserted or is out of ink.
The ink cartridge needs to be replaced soon.
Waste tank is full. Refer to the instruction manual of your
printer.
You attempted to print an image that was made with
another camcorder, has a different format, or was edited on
a computer.
You attempted to print an image that was made with
another camcorder, has a different format, or was edited on
a computer.
You attempted to use the print order settings to print X
images that were made with another camcorder, have a
different format or were edited on a computer.
You attempted to print an image from the CARD PLAY
menu [\ PRINT] without having set the print order.
Cancel printing. Turn off the printer and turn it back on.
Check the printer status.
Cancel printing. Turn off the printer and turn it back on.
Check the printer status.
The printer is experiencing a data transmission error.
Or, you attempted to print from a memory card that
contains a large number of images. Reduce the number of
images.
The printer is in use. Check the printer status.
Printer is warming up. If the message does not disappear
after a few seconds, check the printer status.
Paper lever error occurred. Adjust the paper selection lever
to the proper position.
Close the printer cover securely.
No print head is installed in the printer.
Explanation
E
133