Recording To A Vcr Or Digital Video Device - Canon MV690 Instruction Manual

Recording to a VCR or Digital Video Device

You can copy your recordings by connecting the camcorder to a VCR or a digital video
device. If you connect a digital video device, you can copy recordings with virtually no
generation loss in image and sound quality.
Connecting the Devices
q Connecting a VCR
See Playing Back on a TV Screen (
w Connecting a Digital Video Device
Refer also to the instruction manual of the digital video device.
DV
Recording
CAMERA
1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
If you are connecting via AV terminal, check the setting (
2. Connected device: Load a blank cassette and set the device to record
pause mode.
3. Locate the scene you wish to copy and pause playback shortly before
the scene.
4. Play back the tape.
5. Connected device: Begin recording when the scene you wish to copy
appears. Stop recording when copying is complete.
6. Stop playback.
34).
4 pin - 4 pin: CV-150F DV Cable (optional)
4 pin - 6 pin: CV-250F DV Cable (optional)
PLAY (VCR)
Signal flow
CARD CAMERA
34).
E
CARD PLAY
79