Table of Contents
Advertisement
Using Headphones during Recording
The headphones terminal also serves as AV terminal. Headphones can only be used
when "H" is displayed on the screen. If not, change the setting following the
procedure below.
CAMERA
VCR SETUP
(
38)
Open the menu and select [VCR SETUP]. Select [AV/PHONES H], set it to
[PHONES H ] and close the menu.
Adjusting the Headphone Volume
CAMERA
AUDIO SETUP
(
38)
Open the menu and select [AUDIO SETUP]. Select [ H VOLUME], adjust the
volume with the SET dial and close the menu.
You can turn off the volume completely by turning the SET dial down until [OFF] appears.
Turn the SET dial up to increase the volume again.
60
PLAY (VCR)
PLAY (VCR)
CARD CAMERA
AV/PHONES
••AV
CARD CAMERA
HVOLUME•••••
CARD PLAY
CARD PLAY
Hide quick links:
Advertisement
Table of Contents
