Printing Still Images - Canon MV690 Instruction Manual

Printing Still Images

You can print still images by connecting the camcorder to a printer with Direct Print
function. You can also use the print order settings for direct printing (
Following printers can be connected to your camcorder:
Canon Printers
PictBridge compliant non-Canon Printer
If your CP-300 is not PictBridge compliant (does not carry the PictBridge logo),
upgrade the printer firmware following the instructions on below website to
enable use with this camcorder.
http://www.canon.co.jp/Imaging/cp300/cp300_firmware-e.html
If you cannot access the website, please contact:
❍ For Europe: A local Canon distributor listed in the Canon European Warranty
System List included in the CP-300 kit.
❍ For other regions: Canon Customer Support Help Desk listed in the Canon
Customer Support Leaflet included in the CP-300 kit.
Connecting the Printer to the Camcorder
1. Turn off the camcorder and insert a memory card that contains still images.
2. Turn on the printer.
3. Set the camcorder to CARD PLAY mode.
120
PictBridge compliant CP Printer
Bubble Jet Direct compatible Printer
PictBridge compliant Bubble Jet Printer
Printer with
direct print function
126).