Recording; Recording Movies - Canon DC22 Instruction Manual

Recording •••••- - - - - - - - - - - - - - - - - - - - - - - - - - -
Recording Movies
Before You Begin Recording
Make a test recording first to check if the
camcorder operates correctly. Since
recordings made on a DVD-R or DVD-R
DL disc cannot be deleted, we recommend
you use a DVD-RW disc to make the test
recordings.
ICAMERA]
IIJ' (OJ 13)
3
Disconnect the power source and
remove the battery pack.
4
Close the LCD panel.
OIMPORTANf·_. . . - --·. . . _ ··_-_. . . · _ -_. . · . . _ _· _ · _ . . . . . . . . . · - . .
~
Avoid the following actions while the DISC
access indicator is on or flashing. Failing to do
so may result in permanent data loss.
... Do not subject the camcorder to vibrations or
strong impacts.
- Do not open the disc cover and do not remove
the disc.
- Do not disconnect the power source or turn off
the camcorder.
- Do not change the operating mode.
1
Move the power switch to ON to set
the camcorder in CAMERA mode.
The red CAMERA indicator will turn
on.
2
Move the -" /0 switch to the -"
(Movies) position.
3
Press
I
Start/Stop
I
to begin recording.
• The recording starts; press
[Start/Stop
I
again to pause the recording.
• The DISC access indicator will flash
while recording and will stay on briefly
. after pausing while the scene is
recorded on the disc.
WHEN YOU HAVE FINISHED RECORDING
1
Remove the disc.
2
Turn off the camcorder.
CD--. . - ---·--··--. .
- ·--·~--_
. . . . · - - . . _ -· _ . . - . . . - · - --· · - · . . . - ----_. . _ ----)
1 NOTES
• About the recording time: By changing the
recording mode you can change the recording
time available on the disc
(OJ
44).
• When recording in bright places it may be
difficult to use the LCD screen. In such case,
use the viewfinder instead.
• When recording in very loud places (such as
fireworks shows or concerts), sound may
become distorted or it may not be recorded at
the actual levels. This is not a malfunction.
• About the Power Save mode: In order to save
power when the camcorder is powered by a
battery pack, the camcorder will automatically
shut off if left without any operations for 5
minutes
(OJ
42). To restore the power, slide the
power switch towards MODE and release it, or
move the power switch to _ and back to
ON.
• About the LCD and viewfinder screen: The
screens are produced using extremely high-
precision manufacturing techniques, with more
than 99.99% of the pixels operating to
specification. Less than 0.01 % of the pixels
may occasionally misfire or appear as black,
red, blue or green dots. This has no effect on
the recorded image and does not constitute a
malfunction.