Connecting To A Printer Printing Still Images - Direct Print - Canon ZR850 Instruction Manual

Connecting to a Printer,-,o®
_1 _ CARD OPERATIONS ]
I '_'TRANSFER ORDER ]
Bring (AT, <!_ ) the cursor
G_ to the image you want to
fi_}¢*
-- transfer and press ( _, )
FUNC _ _:] _ "
Repeat this step to set
transfer orders for additional
images.
• i_ appears on images marked with a
transfer order Press ((_) to cancel the
transfer order.
• *After closing the menu the camcorder returns
to the index screen.
Erasing All Transfer Orders
(_ 10)
FUNC.
FUNC.
( L_ 24) v
_[ [t_ MENU ]
[= CARDOPERAT,O.S ]
[TRANS.ORD.ALL ERASE ]
8
¢:,[ YES ]
Connecting to a Printer
PrintingStill Images - Direct Print
_ PictBridge
The camcorder can be connected to any
PictBridge compatible printer. You can mark
the still images you want to print and set the
desired number of copies as a print order
(E_ 75).
Canon printers: SELPHY CP and SELPHY
DS printers and PIXMA printers marked with
the PictBridge logo.
Connecting the Camcorder to the Printer
(L:L_10)
1
Insert the memory card containing
the still images you want to print.
2
Turn on the printer.
3 Connect the camcorder to the
printer using the USB connection
-connection type [] (_ 68)- shown
in the previous section PC
Connection Diagrams,
_, appears and changes to _.
if _ continues to flash (for more than 1
minute) or if _ does not appear, the camcorder
is not correctly connected to the printer. In such
case, disconnect the USB cable and turn offthe
camcorder and the printer. After a short white,
turn them on again, set the camcorder to
mode and restore the connection.
• _ will appear for images that cannot be
printed
• We recommend powering the camcorder
using the compact power adapter
• Refer also to the printer's instruction manual.