Changing The Needle Stop Position; Adjusting The Brightness Of The Lcd - Brother CS-8150 Operation Manual

GETTING READY ———————————————————————————————————————————————————
Changing the needle stop
position
When the sewing machine is purchased, it is set to
leave the needle lowered in the fabric when sewing
is stopped. However, the machine can be set to
instead leave the needle raised when sewing is
stopped.
1 Press (settings key) in the operation
panel, and then press
(arrow keys) until
2 Press (OK key).
The screen for changing the needle stop
position appears.
3 Press to select
To return to , press
The machine is now set to stop with the
needle in the raised position.
4 Press (OK key).
The initial stitch screen appears again.
16
, , and
is selected.
.
.
Adjusting the brightness of
the LCD
The brightness of the LCD can be adjusted.
1 Press (settings key) in the operation
panel, and then press
(arrow keys) until
2 Press (OK key).
The screen for changing the brightness of
the LCD appears.
3 To make the LCD brighter, press
make the LCD darker, press
The brightness of the LCD is changed.
4 Press (OK key).
The initial stitch screen appears again.
, , and
is selected.
(–). To
(+).