Zipper Insertion; Inserting A Centered Zipper - Brother CS-8150 Operation Manual

UTILITY STITCHES ——————————————————————————————————————————————————

Zipper Insertion

A zipper can be sewn in place.
Stitch Name
Pattern
Straight
3
stitch (center Attaching zippers
needle Sewing concealed seams and pintucks
position)
There are many methods for inserting zippers. The procedures for inserting a centered zipper and a side zipper
are described below.

Inserting a centered zipper

Stitching is sewn on both pieces of fabric butted
against each other.
1
1 Right side of fabric
2 Stitching
3 End of zipper opening
1 Attach zigzag foot "J" and sew straight
stitches up to the zipper opening.
With the right sides of the fabric facing each
other, sew reverse stitches after reaching the
zipper opening.
• For details, refer to "Basic Stitching"
(page 72).
2 Using a basting stitch, continue sewing to the
edge of the fabric.
1
2
1 Basting stitching
2 Reverse stitches
3 Wrong side of fabric
4 End of zipper opening
82
Application
2
3
3
4
Stitch Width
[mm (inch.)]
Auto Manual Auto
2.5
– –
(3/32)
3 Press open the seam allowance from the
wrong side of the fabric.
1
1 Wrong side of fabric
4 Align the seam with the center of the zipper,
and then baste the zipper in place.
1
1 Basting stitching
2 Wrong side of fabric
3 Zipper
5 Attach the presser foot holder to the right pin
of zipper foot "I".
1
I
1 Pin on the right side
2 Needle drop point
• For details, refer to "Replacing the presser
foot" (page 41).
Stitch Length
Presser
[mm (inch.)]
Foot
Manual
0.2–5.0
I
(1/64–3/16)
2
3
2