Out Of Memory - Brother MFC-J5910DW Basic User's Manual

Error Message

Out of Memory

Paper Jam [Front]
PaperJam Front,Rear Paper is jammed in the machine.
Paper Jam [Rear]
Screen init. Fail
70
Cause
The machine's memory is full.
The memory card or USB Flash
memory drive you are using does not
have enough free space to scan the
document.
Paper is jammed in the machine.
Paper is jammed in the machine.
Paper dust has accumulated on the
surface of the paper pick-up rollers
and the back sides of the paper feed
rollers.
The Touchscreen was pressed before
the power on initialization was
completed.
Debris may be stuck between the
lower part of the Touchscreen and its
frame.
Action
If a copy operation is in process:
Press Stop/Exit and wait until the
other operations in progress finish,
and then try again.
Press Stop/Exit.
Delete unused files from your memory
card or USB Flash memory drive to
make some free space and then try
again.
Remove the jammed paper by
following the steps in Paper is jammed
at the front of the machine
uu page 75.
Make sure the paper length guide is
set to the correct paper size. DO NOT
extend the paper tray when you load
A5 or smaller size paper.
Remove the jammed paper by
following the steps in Paper is jammed
at the front and back of the machine
uu page 77.
Make sure the paper length guide is
set to the correct paper size. DO NOT
extend the paper tray when you load
A5 or smaller size paper.
Remove the jammed paper by
following the steps in Paper is jammed
at the back of the machine
uu page 76.
Make sure the paper length guide is
set to the correct paper size.
DO NOT extend the paper tray when
you load A5 or smaller size paper.
-
Clean the paper pick up rollers and
the back sides of the paper feed
rollers. (uuAdvanced User's Guide:
Cleaning the paper pick-up rollers)
Make sure that nothing is touching or
resting on the Touchscreen.
Insert a piece of stiff paper between
the lower part of the Touchscreen and
its frame and slide it back and forth to
push out the debris.