Not Registered; Out Of Fax Memory - Brother MFC-J5910DW Basic User's Manual

Error Message
No Paper Fed
No Response/Busy

Not Registered

Out of Fax Memory

Cause
The machine is out of paper or paper
is not properly loaded in the paper
tray.
The paper is jammed in the machine.
Paper dust has accumulated on the
surface of the paper pick-up rollers
and the back sides of the paper feed
rollers.
The Jam Clear Cover is not closed
properly.
The number you dialed does not
answer or is busy.
You tried to access a Speed Dial
number that is not programmed.
The fax memory is full.
Troubleshooting
Action
Do one of the following:
 Refill the paper in the paper tray,
and then press Black Start or
Color Start.
 Remove the paper and load it
again, and then press Black Start
or Color Start. (See Loading
paper and other print media
uu page 12.)
Remove the jammed paper by
following the steps in Printer jam or
paper jam uu page 75.
If this error occurs often during duplex
copying or duplex printing, the paper
feed rollers may be stained with ink.
Clean the paper feed rollers.
(uuAdvanced User's Guide: Cleaning
the paper feed rollers)
Clean the paper pick-up rollers and
the back sides of the paper feed
rollers. (uuAdvanced User's Guide:
Cleaning the paper pick-up rollers)
Make sure the Jam Clear Cover is
closed evenly at both ends. (See
Printer jam or paper jam uu page 75.)
Verify the number and try again.
Set up the Speed Dial number. (See
Storing Speed Dial numbers
uu page 45.)
Do one of the following:
Clear the data in the memory. To

gain extra memory, you can turn
off Memory Receive.
(uuAdvanced User's Guide:
Turning off Memory Receive
operations)
 Print the faxes that are in the
memory.
(uuAdvanced User's Guide:
Printing a fax from the memory)
B
69