Brother MFC-J5910DW Basic User's Manual page 99

Printing (continued)
Difficulty
Machine does not print from
® ®
Adobe Illustrator .
Ink is smudged or running when
using glossy photo paper.
Prints appears dirty or the paper
jams when using Ledger paper.
Suggestions
Try to reduce the print resolution.
uuSoftware User's Guide: Printing (Windows
uuSoftware User's Guide: Printing and Faxing (Macintosh)
Make sure to check the front and back of the paper. Place the glossy surface
(printing surface) face down. (See Paper Type uu page 19.)
If you use glossy photo paper, make sure that the paper type setting is correct.
®
(PC print for Windows user)
 Select Ledger (Short Grain) size paper in Paper Size in the Basic tab of the
printer driver.
 Check Slow Drying Paper in the Basic tab of the printer driver.
(PC print for Macintosh user)
 Select Tabloid (Short Grain) size paper in Paper Size of the printer driver.
 Select Print Settings from drop-down list and then check Slow Drying Paper
of the printer driver.
(Copy)
 Turn on LGR - Short Grain setting in General Setup. (See Secure
Paper Feed mode for Ledger size Short Grain Paper uu page 20.)
 Adjust the copy density to make copies lighter. (uuAdvanced User's Guide:
Adjusting Density)
Troubleshooting
®
)
B
85