Dialing Access Codes And Credit Card Numbers; Pause; Tone Or Pulse (Canada Only) - Brother MFC-9840CDW User Manual

Note
If you have selected Fax/IFAX in d and
added One-Touch or Speed-Dial numbers
that are stored as 'IFAX', you cannot
select S.Fine.
i
Select the file format (TIFF or PDF) that
will be used to send to your computer.
j
Do one of the following:
To store another group for
broadcasting, press OK. Go to b.
To finish storing groups for
broadcasting, press Stop/Exit.
Note
Fax Broadcasting is for black & white only.
Dialing access codes and
credit card numbers
You can combine more than one Quick-Dial
number when you dial. This feature may be
useful if you need to dial an access code for
a cheaper rate from another long distance
carrier.
For example, you might have stored '555' on
Speed-Dial #003 and '7000' on Speed-Dial
#002. You can use them both to dial
'555-7000' if you press the following keys:
Hold down Shift as you press
Search/Speed Dial, 003. Hold down Shift as
you press Search/Speed Dial, 002 and
Black Start or Color Start.
Numbers can be added manually by entering
them on the dial pad:
Hold down Shift as you press
Search/Speed Dial, 003, 7001 (on the dial
pad), and Black Start or Color Start.
This would dial '555–7001'. You can also add
a pause by pressing the Redial/Pause key.

Pause

Press Redial/Pause to insert a 3.5-second
pause between numbers. You can press
Redial/Pause as many times as needed to
increase the length of the pause.

Tone or pulse (Canada only)

If you have a Pulse dialing service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below. If you have Touch Tone service, you
will not need this feature to send tone signals.
a
Press Hook.
b
Press # on the machine's control panel.
Any digits dialed after this will send tone
signals.
When you hang up, the machine will
return to the Pulse dialing service.
8
Dialing and storing numbers
8
8
8
63