Zephir TW4000C Instruction Manual page 12

Turn the knob to the position "FAN", the unit works for cooler without heating.
5. When you want to get high the room temperature, you can switch the knob to the "+" position.
6. When you want the unit to oscillate, please turn on the oscillation switch
the heater.
7. When you want to turn off the heater, please turn the switch to the position "FAN" working for 3 minutes
firstly, then turn the switch to the position "0"
8. This appliance is equipped with a tilting protection, which automatically switches off the heater when it is
pushed over. To restore the heater, re-install in the proper vertical position.
Item
Symbo
l
Heat output
Nominal heat P
nom
output
Minimum heat P
min
output (indicative)
Maximum P
max,c
continuous heat
output
Auxiliary electricity consumption
At nominal heat el
max
output
At minimum heat el
min
output
In standby mode el
SB
INFORMATION REQUIREMENTS FOR LOCAL SPACE HEATERS
Value
Uni
t
KW
2,0
KW
1,35
KW
2,0
2.0 KW
1.0 KW
N/A KW
Item
Type of heat input, for electric storage local space heaters only (select
one)
manual heat charge control, with integrated thermostat
manual heat charge control with room and/or outdoor
temperature feedback
electronic heat charge control with room and/or outdoor
temperature feedback
fan assisted heat output
Type of heat output/room temperature control (select one)
single stage heat output and no room temperature control
Two or more manual stages, no room temperature control
with mechanic thermostat room temperature control
with electronic room temperature control
electronic room temperature control plus day timer
, which is at the back of
Unit
yes
no
no
no
no
no
no
no
no