Step By Step Chart For Wireless Network Configuration; For Infrastructure Mode - Brother MFC-255CW Network Manual

Configuring your machine for a wireless network (Not available for DCP-365CN, DCP-395CN and MFC-295CN)

Step by step chart for wireless network configuration

For Infrastructure mode

a
Confirm your network environment. (See page 24.)
Infrastructure mode
Connected to a computer with an access point
b
Confirm your wireless network setup method. (See page 25.)
Using the Setup
Wizard from the
control panel
control panel menu
(Recommended)
c
Configure your machine for a wireless network. (See page 28.)
See page 28.
Wireless configuration and installing drivers and software have been completed.
Using the Using the PIN
SES/WPS/AOSS Method of Wi-Fi
Protected Setup™
See page 39. See page 44.
Installing drivers and software (See the Quick Setup Guide.)
Ad-hoc mode
or
Connected to a wireless capable computer without
an access point
Temporarily using a
network cable
Windows
(See page 49.)
Macintosh
(See page 73.)
See page 23.
Using the Brother
installer application
Using the
SES/WPS/AOSS
control panel menu
® ®
Windows
(See page 57.)
Macintosh
(See page 81.)
3
3
3
22