For Dcp Models - Brother MFC-255CW Network Manual

Appendix B
Repeating letters
If you need to enter a letter that is on the same key as the letter before, press c to move the cursor to the right
before you press the key again.
Special characters and symbols
Press l, # or 0, and then press d or c to move the cursor under the special character or symbol you want.
Then press OK to choose it. The symbols and characters below will appear depending on your menu
selection.
Press l for
Press # for
Press 0 for

For DCP models

Press a or b repeatedly to enter the text and press OK.
For DCP-373CW, DCP-375CW and DCP-377CW
Press Enlarge/Reduce to move the cursor to the left.
Press Number of Copies to move the cursor to the right.
For other models
Press d or c repeatedly to move the cursor.
Press a or b for characters below
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
(space)!"#$%&'() +,-./:;<=>?@[\]^_`{|}~
Making corrections
For DCP-373CW, DCP-375CW and DCP-377CW
If you entered an incorrect letter and want to change it, press Enlarge/Reduce or Number of Copies to
position the cursor under the incorrect letter. Use the a and b keys to change to the correct letter, then press
Number of Copies repeatedly to move the cursor back to the end of the text.
Press Stop/Exit. All letters above and to the right of the cursor will be deleted. Re-enter the correct letter.
For other models
If you entered an incorrect letter and want to change it, press d or c to position the cursor under the incorrect
letter. Use the a and b keys to change to the correct letter, then press c repeatedly to move the cursor back
to the end of the text.
Press Stop/Exit. All letters above and to the right of the cursor will be deleted. Re-enter the correct letter.
" '
(space) ! # $ % & ( ) + , - . /
: ; < = > ? @ [ ] ^ _
0 \ { | } ~
B
B
B
B
B
156