Brother MFC-255CW Network Manual page 98

Wireless Configuration for Macintosh using the Brother installer application (For DCP-373CW, DCP-375CW, DCP-377CW,
DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW and MFC-795CW)
Network name:(SSID, ESSID)
Communication Mode
Ad-hoc
For example:
Network name:(SSID, ESSID)
HELLO
Communication Mode
Ad-hoc
j
To communicate with the un-configured wireless machine, temporarily change the wireless settings on
your computer to match the machine's default settings shown on this screen. Check the box after you
confirm these settings. Check the box after you confirm the wireless setting, and then click Next.
Note
You can temporarily change the wireless settings on your computer, following the steps below:
1
Click the AirPort status icon in the menu bar.
2
Select SETUP from the pop-up menu.
3
Your wireless network is connected successfully.
Authentication method
Open system
Authentication method
Open system
Encryption mode
WEP
NONE
Encryption mode
WEP
Network key
—
Network key
12345
89
5