Brother DCP-8080DN Software User's Manual page 214

Scan to File
When you choose Scan to File, you can scan a black and white or color document and send it directly to a
®
Macintosh you designate on your network. The file will be saved in the folder and file format that you have
configured in ControlCenter2 on the designated Macintosh
File on page 188.)
a
Load your document.
b
Press (Scan).
c
Press a or b to choose Scan to PC.
Press OK.
d
Press a or b to choose File.
Press OK.
If your machine does not support Duplex Scan, go to step f.
If your machine supports Duplex Scan, go to step e.
e
Press a or b to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
f
Press a or b to choose the destination Macintosh
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination
®
Macintosh on the control panel.
Press OK.
g
Press Start.
The machine starts the scanning process.
Note
• If you want the scanned data in color, choose color in the scan type on the Device Button tab of the
ControlCenter2 configuration. If you want the scanned data in black and white, choose black and white in
the scan type on the Device Button tab of the ControlCenter2 configuration. (See File on page 188.)
• If you would like to change the file name of scanned documents, enter the file name in the File Name
section on the Device Button tab of the ControlCenter2 configuration.
• If you want to change the default file size, choose your preferred rate by moving the scroll bar on the
Device Button tab of the ControlCenter2 configuration.
®
. You can change the Scan configuration. (See
®
you want to send to.
Network Scanning
11
11
206