Resetting The Drum Counter - Brother DCP-7065DN Basic User's Manual

f
Put the toner cartridge firmly into the
new drum unit until you hear it lock into
place. If you put the cartridge in
properly, the green lock lever will lift
automatically.
Note
Make sure that you put in the toner
cartridge properly or it may separate from
the drum unit.
Routine maintenance
g
Clean the corona wire of the drum unit
by gently sliding the green tab from left
to right and right to left several times.
CAUTION
Be sure to return the green tab to the home
position (a) (1). If you do not, printed pages
may have a vertical stripe.
h
Put the new drum unit and toner
cartridge assembly in the machine.

Resetting the drum counter

When you replace the drum unit with a new
one, you need to reset the drum counter by
completing the following steps:
a
Open the front cover and press Clear.
To confirm you are installing a new drum
unit, press a.
b
When the LCD shows Accepted, close
the front cover.
1
A
A
43